Isuzu Amigo 1990
Model Amigo made in 1990 by Isuzu got 9 consumer complains there is 1 investigation as well as 1 recall. Consumer complaints with reference, among others things, to power train, seat belts and steering. The car had one investigation (seat belts). There was one recall concerning trailer hitches . The car has 2 modeles with engines 2.3l, 2.6l.
Model 1990
Engine [L] | Cylinders | Transmission | Drive | Estimate MPG (city/highway/combined) | Unadjusted MPG (city/highway/combined) | Fuel | Fuel cost | Class | Release date |
---|---|---|---|---|---|---|---|---|---|
( 2.3L) | 4 | Manual, 5 gears | RWD | 19/22/20 | 21/28/24 | Regular | $ 788 | 17 | 890820 |
( 2.6L) | 4 | Manual, 5 gears | RWD | 17/21/19 | 19/27/22 | Regular | $ 828 | 17 | 890820 |
( 2.6L) | 4 | Manual, 5 gears | 4WD | 16/19/18 | 18/25/21 | Regular | $ 876 | 18 | 890821 |
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TRAILER HITCHES | ||||||||||||||||
93E023000 | REESE PRODUCTS, INC | E (Equipment) | 670 | 07/22/1993 | MFR | ISUZU MANUFACTURING SERVICES OF AMERICA | 07/22/1993 | 07/27/1993 | ||||||||
Defect Summary | The weld on the receiver unit of the trailer hitch can break. | |||||||||||||||
Consequence Summary | If the failure occurs, the trailer can separate from thetowing vehicle, and could result in a vehicle crash without warning. | |||||||||||||||
Corrective Summary | Replace the trailer hitch. | |||||||||||||||
Notes | System: trailer hitch.equipment description: reese class ii trailer hitch, part no. 06070.note: if your vehicle is presented to the dealer from whom you purchased theitem on an agreed service date and the remedy is not provided or the remedy does correct the safety-related defect or noncompliance, please contact reese products warranty department at 1-800-326-1090, ext. 203. also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393. |
Investigations
NHTSA ID | Manufacturer | Date open | Date close | Subject | Recall campaign | |
---|---|---|---|---|---|---|
SEAT BELTS - FRONT - BUCKLE ASSEMBLY | ||||||
EA95009 | ISUZU MANUFACTURING SERVICES OF AMERICA | 03/10/1995 | 08/02/1995 | TAKATA SEAT BELT BUCKLE FAILURE | 95V103009 | |
There is no summary currently available |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
POWER TRAIN - CLUTCH ASSEMBLY | |||
01/01/1995 | 1 | ||
Clutch failed twice. | |||
POWER TRAIN - MANUAL TRANSMISSION | |||
12/01/1992 | 1 | ||
Manual transmission failed. *skd | |||
SEAT BELTS - FRONT - BUCKLE ASSEMBLY | |||
Rear lap belt plastic buckle has detached and fallen off of seat belt. tt | |||
STEERING - GEAR BOX - SHAFT SECTOR | |||
1 | |||
When making a turn thre is a noise, took to dealer to replace the steering shaft . *ak *jb | |||
STRUCTURE - BODY - ROOF AND PILLARS | |||
03/01/1991 | 1 | ||
Convertible top leaks. | |||
TIRES - SIDEWALL | |||
08/01/2000 | 1 | 12/01/1991 | |
4 tires bought same time, installed on vehicle, exposed to same wear and conditions: 3 vn dot code, 1 vd dot code - vd code tire has a fissure in the sidewall all the way around the tire, adjacent to the wheel rim. contacted firestone, they said it was cosmetic and due to my miscare of the tire but couldn't explain why the other 3 tires should be in perfect condition.*ak( dot number: vd60axc336 tire size: 31x10.5r15 ) | |||
VEHICLE SPEED CONTROL - LINKAGES | |||
09/24/2001 | 1 | ||
The rubber sleeve that protects the exposed throttle cable from dirt had started to melt (from engine heat). the rubber had melted around the throttle cable causing the cable to be held in the open position. when i took my foot off the accelerator and discovered the throttle was sticking i started banging on the side of the pedal with my foot thinking that the problem was with the pedal itself causing the throttle to be pressed more. this happend while traveling south on us 301 approaching the us 70 intersection in selma, north carolina. after i did get the vehicle shut off, i checked around the throttle area under the hood and found the rubber melting onto the cable. i took off what was left and cleaned the cable and have not had a problem since.*ak | |||
VISIBILITY - DEFROSTER/DEFOGGER SYSTEM - REAR WINDOW | |||
02/25/1995 | 5 | ||
Rear defroster problems. | |||
WHEELS - CENTER SECTION | |||
05/01/1990 | 1 | ||
Hubs replaced. |