Isuzu Amigo 2000

Model Amigo made in 2000 by Isuzu got 12 consumer complains there are 2 recalls as well as 20 service bulletins. Consumer complaints with reference, among others things, to air bags, engine and engine cooling and fuel system, gasoline. Technical service bulletines regarding electrical system, engine and engine cooling and equipment. There were some recalls concerningengine and engine cooling, suspension. The car has 2 modeles with engines 2,2, 3,2.

Model 2000

Engine [L]CylindersTransmissionDriveEstimate MPG (city/highway/combined)Unadjusted MPG (city/highway/combined)FuelFuel costClassRelease date
2,2 4Manual, 5 gearsR20/23/2122,24/29/24,84Regular857SPEC PURP VEH - S.U.V. - 2WD
3,2 6Lockup/automatic, 4 gearsR16/19/1717,6/24,6/20,18Regular1058SPEC PURP VEH - S.U.V. - 2WD
3,2 6Lockup/automatic, 4 gears416/19/1717,6/24,6/20,18Regular1058SPEC PURP VEH - S.U.V. - 4WD
3,2 6Manual, 5 gears417/20/1818,6/25,1/21,05Regular1001SPEC PURP VEH - S.U.V. - 4WD

Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
ENGINE AND ENGINE COOLING - ENGINE
01I002000ISUZU MOTORS LIMITED I06/22/2001MFRISUZU MANUFACTURING SERVICES OF AMERICA05/29/200106/05/2001
Defect SummaryThis is not a safety recall in accordance with the safety act. however, it is deemed a safety improvement campaign by the agency. vehicle description: 1998-2000 rodeo (ue) and amigo (ua) models equipped with 2.2l 4-cylinder engines. the timing belt could break before the recommended scheduled maintenance.
Consequence SummaryThis condition could cause the engine to crank but will not start or the engine could stall while driving and will not restart.
Corrective SummaryDealer will inspect the vehicle to determine the condition of the timing belt and tensioner. the dealer will replace the timing belt. depending on the condition or model of the timing belt tensioner, the tensioner may also be replaced. isuzu has decided to conduct a service campaign to replace the timing belt. owner notification began june 22, 2001. owners can contact isuzu at 1-800-643-4070, ext. 426, concerning this program.
Notes
SUSPENSION - REAR
12V306000ISUZU MANUFACTURING SERVICES OF AMERICAfrom 10/04/1999 to 07/21/2000V (Vehicle)11221MFRISUZU MANUFACTURING SERVICES OF AMERICA06/29/201206/29/2012
Defect SummaryIsuzu is recalling certain model year 1998-2000 amigo and model year 2001-2002 rodeo sport vehicles, that were originally sold, or are currently registered, in the states of maine, new hampshire, vermont, massachusetts, rhode island, connecticut, new york, new jersey, pennsylvania, delaware, maryland, the district of columbia, west virginia, ohio, indiana, michigan, illinois, wisconsin, minnesota, iowa, missouri, and kentucky. these vehicles may experience excessive corrosion in the vicinity of the forward mounting point bracket for the left or right rear suspension lower link.
Consequence SummaryExcessive corrosion may result in the left or right rear suspension lower link bracket becoming detached from the frame, which can affect vehicle handling and increase the risk of a crash.
Corrective SummaryDealers will inspect the rear suspension lower link bracket area. for vehicles in which little or no corrosion is found, the area will be treated with an anti-corrosive compound. for vehicles in which corrosion has damaged the rear suspension lower link bracket and affected its connection to the vehicle frame, a reinforcement bracket will be installed. in the rare event the corrosion is so severe that the reinforcement bracket remedy would not be appropriate, isuzu will offer to repurchase the vehicle for an amount based on the kelley blue book
NotesCustomers may also contact the national highway traffic safety administration

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
ELECTRICAL SYSTEM
IB0104S00404/01/2001621353Service information stating that if ignition coil #6 is incorrectly installed in any of the #1 through #5 cylinders, it may cause the malfunction indicator lamp to come on and set the p0300 engine misfire code. *tt09/18/2001
IB0104S00102/01/2001619827Service information regarding diagnostic trouble code p1340 ion sensing module cylinder id fault.07/02/2001
IB0004S00912/01/2000615683Some vehicles that have recently had the engine replaced with a long block will set code p1336 for tooth error correction. *tt01/28/2001
ELECTRICAL SYSTEM - IGNITION
IB00S00101/01/2000610546Information bulletin introducing the new ion sense ignition (isi) for model year 2000 vehicles. *tt05/05/2000
ENGINE AND ENGINE COOLING - ENGINE
IB0101S00206/01/2001621368Subject regarding hec engine timing belt scrapping. *tt09/18/2001
IB0104S00203/01/2001621343Subject regarding p0337 crankshaft position sensor circuit low input correction. *tt09/17/2001
EQUIPMENT - ELECTRICAL - AIR CONDITIONER
IB0012S00312/01/2000615675Information bulletin regarding rodeo and amigo / rodeo sport hvac operation update for vehicles with factory installed air conditioning only. *tt01/28/2001
EXTERIOR LIGHTING - HEADLIGHTS
IB0011S00304/01/2000612586Service information regarding headlight aiming procedure. *tt06/09/2000
POWER TRAIN - AUTOMATIC TRANSMISSION - CONTROL MODULE (TCM, PCM)
IB0004S00512/01/2000615678This bulletin provides information on the p1640 and p1650 output drive codes which refer to output driver circuit conditions related to the pcm. *tt01/28/2001
SERVICE BRAKES, AIR - DISC - ROTOR
070900207/01/200710022539Rear brake rotors. *kb08/20/2007
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - DRUM
IB0109S00106/01/2001621373Subject regarding drum brake adjustment procedure. *tt09/18/2001
STEERING
IB0110S00103/01/2001621348Information regarding sector shaft alignment on the steering rack assembly. *tt09/18/2001
STRUCTURE - BODY
IB00S00802/01/2000614136This bulletin mentions that the safety crash cage bracket used on vehicles will not allow the installation of 1999 running boards. there are newly designed running boards for modelyear 2000 vehicles. *tt09/29/2000
STRUCTURE - BODY - DOOR
0211S00103/01/2002633926Door check arm popping sound. *jg09/26/2002
SB0111S00302/01/2001619828Some owners may comment on loud door check arm popping sound when opening and closing the door. *tt07/02/2001
SUSPENSION - REAR
SB0006S00303/01/2000613452Vehicles produced prior to vin breakpoint 5y4331226 may exhibit a condition where excessive paint thickness or uneven mounting surface on certain rear suspension components may cause certain bolts and nuts to loosen. *tt07/19/2000
UNKNOWN OR OTHER
IB0004S00812/01/2000615682Some vehicles may randomly set a pcm code p0502 in a deceleration mode usually with 0% throttle. the malfunction indicator light will only set after the fault has been detected for two consecutive key cycles. *tt01/28/2001
VEHICLE SPEED CONTROL
SB0104S00107/01/2001SB0104S001622229Some engines may ocassionally experience idle fluctuation and / or the malfunction indicator lamp will illuminate because an accelerator position sensor (aps) diagnostic trouble code p1271, p1273, p1275, p1280, or p1285 is set.10/16/2001
VEHICLE SPEED CONTROL - LINKAGES
IB0004S00304/01/2000612587Service information pertaining to accelerator position sensor adjustment on vehicles with electronic throttle equipped with v6 engines. *tt06/09/2000
WHEELS
SB0111S00607/01/2001621364Some vehicles built prior to vin breakpoint 14327313 may experience mud flap interference causing a rubbing sound when making a turn. *tt09/18/2001

Consumer Complaints


Fail datemilesoccurencesPurchase date
AIR BAGS
08/29/2000108/01/2000
 My wife and daughter were involved in a crash with our 2000 isuzu amigo. my wife impacted a vehicle which had crashed into another vehicle at approximately 25 mph. neither air bag deployed nor did the seat belt tighten up to restrain my wife, which resulted in her impacting the steering wheel. at the same time, the drivers seat moved forward and did not remain stationary.
ENGINE AND ENGINE COOLING - ENGINE
07/17/200450000210/19/2000
 Tl*the contact owns a 2000 isuzu amigo. while driving approximately 25mph the vehicle stalled with no prior warnings. the vehicle was towed to the dealer and they replaced the engine and units of the power train. three years later, while driving approximately 55 mph the vehicle stalled. the dealer stated that her vehicle wasn't included in recall number 01i002000, engine and engine cooling. the dealer also stated that the contact would be responsible for the cost to replace the engine. the vehicle was not repaired. a formal complaint was also filed with the manufacturer. the failure mileage was 50,000 and the current mileage was 100,000.
05/12/200327000003/29/2001
 Engine using oil, took to dealer, had to pay 240.00 for engine cleaning to try to fix problem with rings sticking. isuzu knew there was a problem. after paying for service engine was still using 1 quart of oil in 500 miles. dealer replaced rings in engine check engine light has intermittently flashed ever since service was done, doesn't stay on though. have to return to dealer again. *nlm
ENGINE AND ENGINE COOLING - ENGINE - GASOLINE
07/11/200108/01/2000
 Engine knocks (pings) under load 2300-3000 rpm's. dealer reprogramed computer, but the knock was still present. thought it might be bad gas, and suggested i try using 89 octane instead of 87. the 1989 octane slove the problem for about 2500 miles, but now the knocking is back. i would guess that the 1989 octane was only masking the problem as it continued to get worse.*ak
01/10/200109/01/2000
 Accessive engine knock at high rpm. isuzu said it's normal. *ak
FUEL SYSTEM, GASOLINE - DELIVERY - FUEL PUMP
09/05/200445000201/04/2001
 Fuel sensor failed. one wire wore out on the fuel sensor. the fuel pump had to be replaced costing $660. the isuzu amigo was only 31/2 years old at the time. *ak
POWER TRAIN
02/17/20031
 The vehicle jumped out of gear while driving.*jb
SEATS
08/29/2000108/01/2000
 My wife and daughter were involved in a crash with our 2000 isuzu amigo. my wife impacted a vehicle which had crashed into another vehicle at approximately 25 mph. neither air bag deployed nor did the seat belt tighten up to restrain my wife, which resulted in her impacting the steering wheel. at the same time, the drivers seat moved forward and did not remain stationary.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
07/01/2000
 No summary listed for above vehicle. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
1
 All 4 rotors and brake pads were warped and had to be replaced at only 12000 miles.*ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
1
 All 4 rotors and brake pads were warped and had to be replaced at only 12000 miles.*ak
VISIBILITY - SUN ROOF ASSEMBLY
08/16/2001
 While putting sunroof back on vehicle it exploded, consumer received cuts to face/ neck and legs. *ak

Car dealers selling


StateCityZipNamePhone
VARICHMONDCAR MAX