Itasca Navion 2010
Model Navion made in 2010 by Itasca got 4 recalls. There were some recalls concerningelectrical system, seat belts and seats.
Model 2010
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ELECTRICAL SYSTEM - FUSES AND CIRCUIT BREAKERS | ||||||||||||||||
12V559000 | WINNEBAGO INDUSTRIES INC. | from 11/13/2007 to 08/10/2012 | V (Vehicle) | 2944 | MFR | Winnebago Industries, Inc | 12/03/2012 | 12/05/2012 | ||||||||
Defect Summary | Winnebago is recalling certain model year 2009-2013 winnebago model era, view, and via motorhomes, and 2010-2013 itasca model navion and reyo motorhomes; manufactured november 13, 2007 through august 10, 2012. the proper fuses were not installed for the refrigerator circuits. | |||||||||||||||
Consequence Summary | Without the proper fuse, heat can build which could lead to a vehicle fire. | |||||||||||||||
Corrective Summary | Winnebago will notify owners, and dealers will replace the fuses. the recall is expected to begin in early january 2013. consumers may contact winnebago industries owner relations at 1-641-585-6939. | |||||||||||||||
Notes | Winnebago's recall campaign number is 127.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
SEAT BELTS | ||||||||||||||||
10V470000 | WINNEBAGO INDUSTRIES, INC. | V (Vehicle) | MFR | WINNEBAGO INDUSTRIES, INC. | 10/05/2010 | 10/12/2010 | 571 | 210 | ||||||||
Defect Summary | Winnebago is recalling certain model year 2006 through 2011 winnebago view and itasca navion motor homes because the dinette area seat belt restraints on those vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 210, seat belt assembly anchorages. in a collision, the generated crash forces can cause the restraint's attachment to tear and allow the anchor to separate from the body of the vehicle. | |||||||||||||||
Consequence Summary | If the restraint separates from the vehicle during a crash, the belt will not properly restrain the seat occupant, increasing the risk of injury or death to the occupant. | |||||||||||||||
Corrective Summary | Winnebago has not yet provided a remedy and an owner notification schedule for this campaign. owners may contact winnebago at 1-800-537-1885. | |||||||||||||||
Notes | Winnebago safety recall no. 118.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . | |||||||||||||||
SEATS | ||||||||||||||||
09V500000 | WINNEBAGO INDUSTRIES, INC. | from 11/12/2009 to 12/16/2009 | V (Vehicle) | 12 | 01/15/2010 | MFR | WINNEBAGO INDUSTRIES, INC. | 12/30/2009 | 12/30/2009 | 571 | 207 & 210 | |||||
Defect Summary | Winnebago is recalling certain model year 2010 view and itasca navion motor homes for failing to comply with the requirements of federal motor vehicle safety standard no. 207, seating systems, and federal motor vehicle safety standard no. 210, seat belt assembly. the seats are missing a reinforcing plate. | |||||||||||||||
Consequence Summary | This does not meet the requirements of the standard. | |||||||||||||||
Corrective Summary | Dealers will remove the swivel and install a new design of swivel that does not require a reinforcing plate in order to meet the standard. this service will be performed free of charge. the safety recall began on january 15, 2010. owners may contact winnebago at 1-800-537-1885. | |||||||||||||||
Notes | Winnebago safety recall no. 114.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . | |||||||||||||||
10V248000 | WINNEBAGO INDUSTRIES, INC. | from 04/27/2009 to 01/21/2010 | V (Vehicle) | 252 | MFR | WINNEBAGO INDUSTRIES, INC. | 06/01/2010 | 06/08/2010 | ||||||||
Defect Summary | Winnebago is recalling certain model year 2010 view, view profile, itasca navion, and navion iq motor homes manufactured from april 27, 2009 through january 21, 2010. these vehicles may have a missing bolt in the driver and/or passenger seats. | |||||||||||||||
Consequence Summary | If a bolt is missing, the seat and/or seat belt may not function as designed in the event of a crash, increasing the risk of injury or death. | |||||||||||||||
Corrective Summary | Dealers will check for the existence and torque of the seat bolts and install and/or replace as necessary free of charge. the safety recall is expected to begin on or before july 2, 2010. owners may contact winnebago at 641-585-6939. | |||||||||||||||
Notes | Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . |