Mack Ctp 2006
Model Ctp made in 2006 by Mack got 4 recalls as well as 16 service bulletins. Technical service bulletines regarding engine and engine cooling and equipment. There were some recalls concerningparking brake and service brakes, air.
Model 2006
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PARKING BRAKE | ||||||||||||||||
07V360000 | MACK TRUCKS, INC | from 11/04/2005 to 05/01/2007 | V (Vehicle) | 18805 | 01/10/2008 | MFR | MACK TRUCKS, INC | 08/15/2007 | 08/16/2007 | |||||||
Defect Summary | On certain trucks equipped with bendix sr-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button. | |||||||||||||||
Consequence Summary | This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Mack is working with bendix to repair these vehicles (please see 07e037). bendix will install a check valve repair kit for the affected sr-7 spring brake modulating valve free of charge. the recall began on january 10, 2008. owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586. | |||||||||||||||
Notes | Mack recall no. sc0335 (sc0328).customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
SERVICE BRAKES, AIR - SUPPLY - CHECK VALVE | ||||||||||||||||
07V361000 | MACK TRUCKS, INC | from 01/02/2004 to 07/26/2007 | V (Vehicle) | 21847 | 01/09/2008 | MFR | MACK TRUCKS, INC | 08/15/2007 | 08/16/2007 | |||||||
Defect Summary | On certain trucks equipped with parker single check valves (scv) provided by bendix. the defect exists in the parker scv that connects with the supply port of the sr-7 spring brake modulating valve. after prolonged use of the parker scv, the valve body retainer may become excessively worn and eventually break apart. pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve. | |||||||||||||||
Consequence Summary | This condition can cause a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button. these conditions can occur without warning, leading to unintended vehicle rollaway, brake drag, or in the case of loss of primary circuit, inability to modulate the spring brakes. | |||||||||||||||
Corrective Summary | Mack is working with bendix to replace the parker single check valve. the recall began on january 9, 2008. owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586. | |||||||||||||||
Notes | Mack recall no. sc0334 (sc0327).customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES | ||||||||||||||||
07V098000 | MACK TRUCKS, INC | from 06/28/2005 to 01/31/2007 | V (Vehicle) | 3587 | 03/15/2007 | MFR | MACK TRUCKS, INC | 03/14/2007 | 03/14/2007 | |||||||
Defect Summary | On certain trucks, the cotter pin that retains the brake pedal clevis pin may not have been installed. the clevis pin connects the brake pedal to the brake foot valve. | |||||||||||||||
Consequence Summary | If the pin were to come loose, the driver would not be able to apply the service brake, which could result in a crash. | |||||||||||||||
Corrective Summary | Dealers will inspect to see if the cotter pin is missing. if the pin is missing, the cotter pin will be installed. owners are being advised not the drive the vehicle until the pin has been installed. the recall began on march 26, 2007. owner may contact mack truck at 1-800-528-6586. | |||||||||||||||
Notes | Mack trucks recall no. sc0321.customers may contact the national highway traffic safety administration | |||||||||||||||
TRAILER HITCHES - FIFTH WHEEL ASSEMBLY | ||||||||||||||||
07V497000 | MACK TRUCKS, INC | from 01/09/2006 to 06/29/2007 | V (Vehicle) | 950 | 01/28/2008 | MFR | MACK TRUCKS, INC | 10/23/2007 | 10/23/2007 | |||||||
Defect Summary | On certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. an over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin. | |||||||||||||||
Consequence Summary | There is a possibility that the pivot bolt can become loose without the driver's knowledge. when this occurs, the driver could drive away and the trailer could become disengaged, increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. the recall began on january 28, 2008. owners may contact mack trucks at 1-800-528-6586. | |||||||||||||||
Notes | Mack trucks recall no. sc0331.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
ENGINE AND ENGINE COOLING | |||||
SB-262-008 | 12/01/2010 | 10037935 | Mack trucks: there is a new thermostat seal and cover to prevent coolant leakage. *rm | 06/08/2011 | |
SB-262-008 | 12/01/2010 | 10037935 | Ready | 06/08/2011 | |
ENGINE AND ENGINE COOLING - ENGINE - DIESEL | |||||
SB-214052 | 01/10/2008 | 10032350 | Mack truck: exhaust manifolds with stainless steel seal rings-cxp and ctp models equipped with us04 emission compliant mp7 engines. to provide improved sealing at the exhaust manifold joints, a revised exhaust manifold assembly (part no. | 03/10/2010 | |
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM | |||||
SB-214-024 | 11/01/2010 | 10037488 | Mack trucks: if there is a failed outer valve spring there is a replacement procedure. *rm | 05/24/2011 | |
SB-214-024 | 11/01/2010 | 10037488 | Ready | 05/24/2011 | |
ENGINE AND ENGINE COOLING - EXHAUST SYSTEM - MANIFOLD/HEADER/MUFFLER/TAIL PIPE | |||||
FSB-214-024 | 01/01/2011 | 10040051 | Mack trucks: there is revised mounting hardware for the exhaust manifold and turbocharger. *rm | 08/15/2011 | |
FSB-214-024 | 01/01/2011 | 10040051 | Ready | 08/15/2011 | |
SB-214052 | 01/10/2008 | 10032350 | Mack truck: exhaust manifolds with stainless steel seal rings-cxp and ctp models equipped with us04 emission compliant mp7 engines. to provide improved sealing at the exhaust manifold joints, a revised exhaust manifold assembly (part no. | 03/10/2010 | |
EQUIPMENT - ELECTRICAL - AIR CONDITIONER | |||||
SB-635012 | 01/04/2008 | 10032348 | Mack truck: fine particulate filter for hvac units-cxu, chu, gu, cxp and ctp models. a pleated fine particulate hvac filter (part no. 85112361) has been developed for the hvac units in certain models. no model years listed. | 03/10/2010 | |
EQUIPMENT - OTHER - OWNERS/SERVICE/OTHER MANUAL | |||||
SB-214-024 | 11/01/2010 | 10037488 | Mack trucks: if there is a failed outer valve spring there is a replacement procedure. *rm | 05/24/2011 | |
SB-214-024 | 11/01/2010 | 10037488 | Ready | 05/24/2011 | |
POWER TRAIN - AXLE ASSEMBLY | |||||
TSB-517009 | 11/21/2008 | 10030224 | Mack truck: broken longitudinal torque rod mounting stud in axle spring seat due to wing bracket interference. this includes the td model. no model years listed. *pe | 08/27/2009 | |
POWER TRAIN - CLUTCH ASSEMBLY | |||||
SB-313004 | 01/23/2008 | 10032351 | Mack truck: revised air assist clutch cable. effective 9/17/07, a revised air assist clutch cable (part no. 27rc410m) was implemented into production on cxu, chu, and gu model chassis. no model years listed. *pe | 03/10/2010 | |
SB-313006 | 08/06/2009 | 10032084 | Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave | 02/12/2010 | |
POWER TRAIN - CLUTCH ASSEMBLY - BELL HOUSING | |||||
SB-313006 | 08/06/2009 | 10032084 | Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave | 02/12/2010 | |
POWER TRAIN - CLUTCH ASSEMBLY - PEDAL/LINKAGE | |||||
SB-313006 | 08/06/2009 | 10032084 | Mack truck: air assist clutch conversion. air assist to non assist clutch cable conversion. the air operated clutch assist system was designed to reduce clutch pedal effort by approximately 20%, along with reducing the clutch pedal trave | 02/12/2010 |