Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, AIR - DISC - ROTOR
984503/02/1998601264Availability of hub-mount brake rotor machining equipment. *yc07/15/1998
SERVICE BRAKES, HYDRAULIC - ANTILOCK
985A603/18/1998601004Some vehicles may cycle when brakes are applied on rough roads or on an incline while making a sharp turn. *yc12/14/2000
9521210/01/199546478The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par04/25/1996
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
985A1803/18/1998601018Some vehicles may exhibit brake roughness (brake pedal pulsation, steering wheel shake and / or nibble) under light brake applications from 105 to 0 km/h (65 to 0 mph). *yc12/08/2000
9919409/20/19996090082Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt03/06/2000
985A1103/18/1998601009Service tip information regarding elimination of sanding rotors and drums. *yc06/17/1998
9622210/21/199650941Brakes - elimination of sanding rotors and drums - service tip. *tw06/17/1997
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
985A1303/18/1998601012The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc06/17/1998
BC352397120101/23/199751504Ferodo nts rear service linings part number (#f3sz-2200-ba) for rear disc brake applications on 1993 model year vehicles. *jd06/27/1997
BC101749712001/23/199751527As of october, 1996 ford engineering has relaesed ferodo nt8 rear service linings part numeber (#f3sz-2200-ba) for rear disc brake applications.06/27/1997
BC889995040104/01/19953030300Unknown11/01/1995
956203/01/199539900Roughness concern during brake application. *tw11/01/1995
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
981401/19/1998605562Subject regarding the availability of hub-mount brake rotor machining equipment. *tt07/09/1999
985A503/18/1998601003Hub-mount brake rotor machining equipment from rotunda is now approved for warranty and service use. *yc06/17/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - SHOES/LININGS
BC889995040104/01/19953030300Unknown11/01/1995
956903/01/199539905Certain shoe and lining kits do not meet ford dimensional specifications. *tw11/01/1995
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
0217609/02/200210008580Lamp-brake-invadvertent disabling of brake shift interlock. *mj08/05/2004

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR
 Consumer states of having problems with sensor. dealer was contacted. ts
SERVICE BRAKES, AIR - DISC - ROTOR
01/27/1997211/01/1992
 Rotors failed.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
05/10/19993
 Ongoing problem with abs/ front brake wearing excessively. rotors replaced on three occasions, and brake pads have to be replaced every 10,ooo miles. dealer notified, and informed consumer that was normal for this vehicle. consumer seeking help from nhtsa, and believes this is a manufacturer's defect. *ak
0
 Vehicle skids when applying the brakes at 35 to 40 mph. this problem happens during any type of weather condition.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
511/12/1993
 Grease on threads and self adjusting star gets full of brake dust, seizes up and refuses to turn, self adjusting arm breaks teeth off star, rear brake dont adjust causing car to stop with front brakes which overheat, brake fluid turns to gas by boiling and never returns to liquid so the front brakes rub and the brakes overheat, rear brakes changed yet problem continues. nlm
01/01/1998
 When driving at any speed and applying the brakes, brake's went straight to the floorboard. also, pcv valve went out, and transmission overflowed which caused the transmission fluid to get onto transmission and engine. consumer had the engine rebuilt, and two water pumps were replaced. engine check light kept coming on. *ak
07/21/19971
 Consumer states when applying brakes steering wheel vibrates. *ak
11/02/1995
 Poor performance of the brake system brakes locked up caused consumer to have an accident. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
04/04/2000308/01/1993
 The cougar head gaskets blown and the extended warrenty was exhausted 1 month prior the dealership wouldnt stand behinde the problem so i investegated the problem and found out numerous cougars with 3.8 engines has had this problem the brake problem has been continious since i have owned this cougar new as of today i have replaced the rotors calipers and pads for the 3 rd time i feel this is a serious problem with this make and model and once again the dealership denys any such problems with the brakes and head gaskets. *ak
05/10/19993
 Ongoing problem with abs/ front brake wearing excessively. rotors replaced on three occasions, and brake pads have to be replaced every 10,ooo miles. dealer notified, and informed consumer that was normal for this vehicle. consumer seeking help from nhtsa, and believes this is a manufacturer's defect. *ak
 Front brakes are small in wet weather the brakes don't hold almost cause accident more than once . tt
05/15/19955
 Front brakes replaced three times. *aw
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
11/18/19943
 Brakes failed, resulting in accident, also front brake pads/rotors failed 3 times, causing brakes to pulsate. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
12/01/1995
 Brakes squeak and when applying foot to the pedal, it shakes and shimmies. dealer contacted, and stated defective rotors, and replaced them three times in three years. however, the problem still exists. *ak
6
 Consumer has had six sets of rotors on vehicle in 3 years . the rotors need to be replaced again. *ak
 While driving, upon braking, experienced violent shaking in steering wheel due to rotor warping, intially dealer turned rotors, but within 3 months rotors warped again, dealer has replaced rotors again. *ak
108/01/1993
 Resurfaced warped disc brake rotors. *ak
08/01/1993
 Disc brake rotors warped with very low milage. air conditioner motor chirps and has to be replaced approximately every six months.
 Front brake rotors warped, dealer states that this was due to defective design. please give further details
 Experienced reoccurring problem with warpage of brake rotors, due to front disc brake overheating. *ak
02/01/1996
 Brake failure, vibration in the front end, rotors warped after 5 thousand miles, and replaced pads. *ak
09/30/19930
 Brake rotors continually warp, causing vibrations. *dsh
01/01/19945
 Abs brakes, continue wear of disc rotors 5 times/extended stopping distance, making a loud noise. tt
08/22/1994
 Front brake rotors are warping resulting in front wheel vibration. tt
11/22/19941
 Warped front brake rotors. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
11/27/19941
 Master cylinder/brake pads/rotors replaced due to cracking, causing loss of control. *skd