Recalls


CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC - ANTILOCK
93V023000FORD MOTOR COMPANYfrom 01/01/1993 to 01/01/1993V (Vehicle)21205/07/1993MFRFORD MOTOR COMPANY01/04/199302/24/1993
Defect SummaryAnti-lock brake system controllers designed for rear wheel drive cars may have been installed on these front wheel drive cars..
Consequence SummaryThis could result in reduced braking ability and possiblevehicle accident.
Corrective SummaryReplace the rear wheel drive abs controller with a front wheel drive abs controller.
NotesSystem: brakesvehicle description: passenger cars with optional anti-lock brake systems (abs).

Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, AIR - DISC - ROTOR
984503/02/1998601264Availability of hub-mount brake rotor machining equipment. *yc07/15/1998
SERVICE BRAKES, HYDRAULIC - ANTILOCK
985A603/18/1998601004Some vehicles may cycle when brakes are applied on rough roads or on an incline while making a sharp turn. *yc12/14/2000
9521210/01/199546478The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par04/25/1996
9425101/01/199439719Brakes - antilock- brake pedal has slip/stick condition after application. *tw11/01/1995
9425112/01/199438053Anti-lock brakes - brake pedal has slip/stick condition after application - noise/vibration on slow apply and release. *tw02/07/1995
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
967403/25/1996613327Experiencing a squeal noise coming from the rear brakes on some vehicles when braking. *tt06/21/2000
9919409/20/19996090082Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt03/06/2000
985A2003/18/1998601020A squealing noise may come from the rear brakes on some vehicles when braking. *tt06/18/1998
985A1103/18/1998601009Service tip information regarding elimination of sanding rotors and drums. *yc06/17/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
985A1303/18/1998601012The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc06/17/1998
956203/01/199539900Roughness concern during brake application. *tw11/01/1995
BC889095040104/01/19953031400Unknown11/01/1995
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
981401/19/1998605562Subject regarding the availability of hub-mount brake rotor machining equipment. *tt07/09/1999
985A503/18/1998601003Hub-mount brake rotor machining equipment from rotunda is now approved for warranty and service use. *yc06/17/1998
SERVICE BRAKES, HYDRAULIC - PEDALS AND LINKAGES
985A703/18/1998601005Service brake pedal may have a slip / stick condition when the brake is applied. *tt06/17/1998
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
0217609/02/200210008580Lamp-brake-invadvertent disabling of brake shift interlock. *mj08/05/2004

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - DISC - ROTOR
06/17/1994309/01/1993
 On several occasions the brake rotors experienced failure. *yc
SERVICE BRAKES, HYDRAULIC
07/15/20030
 I don't have the information for all the above but could find it if necessary. i am more concerned about the head gasket which needs to be replaced. i was never made aware that there was a problem that could happen at any time. i do not know what to do and, living on a small pension and social security, do not have thge money to repair or replace the vehicle.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
10/01/20041
 Defective brake system. *bf the consumer stated the abs was as non- effective as a normal hydraulic braking system. the consumer stated there was a recall regarding the issue, however the local dealer questioned authenticity of the notice.*jb
08/01/20010
 When applying brakes pedal goes halfway and it hesitates. abs braking system light comes on dashboard. dealership is aware of problem.*ak
05/01/20012003/01/1994
 Sometimes the abs brakes seem to actuate even though the road is dry and the brakes are not applied hard. the rate of abs application seems much less than normal, 2-3/sec rather than the normal 10/sec. the stopping distance is increased so that there is an increase in chance for an accident. i have disconnected the abs so that the brakes act normally but without the benefit of abs which may be ok for the summer but having abs on icy winter roads will be crucial to avoiding accidents.*ak
09/01/1998
 Exciter ring in front abs split/sheared, causing brake pedal to kick back towards driver when t brake pedal was pressed. this resulted in a loss of brake effectiveness. consumer was unsure about safety of this vehicle. please provide any additional information/attachments.*ak
06/10/1999
 Abs brakes are not working. *ak
06/27/1999101/01/1997
 Accelerator pedal stuck to floor; brakes did not work; see odi id 460653,543622,703422,838058,942316,941502,942869,944210,954379,971219,977939,977168,987238 for similiar problems-ford 2x refused to pay for 2nd opinion/investigation of problem. *ak
 There is a reduction of braking at most times, also sounds of grinding, consumer replaced the rotors approx. (7) times also turned (7) times, due to worping from vibration of applying the brakes, this happens worp rotors every (3,000)miles and every (10,000) they would need replacing.
1
 Leak in the anti-lock system on the rear passenger wheel.
05/15/1998
 Rotors are warped, the vehicle has been inspected two times. mechanic states that the pads may be overheating, and cannot take the heat. dealer cannot duplicate the problm. *ak
109/16/1993
 Air conditioner failed.
109/16/1993
 Abs brakes failed.
109/16/1993
 Head gasket failed.
02/21/1996
 Abs system failure, entire system malfunctioned and needs to be replaced. *ak
03/24/19934
 Vibration felt when brakes applied, prior to recall.(93v023000) *dsh
 Vehicles abs braking system malfunctions intermittently with sudden extended stopping distance with spongy pedal.dealer cannot find problem. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
06/01/20010
 Consumer was traveling about 66mph on highway, approaching a traffic light she applied brakes, and pedal went to the floor. there was no brake power. dealership was aware of problem.*ak
11/22/19961
 Inspect, clean and adjust brakes, replaced front brake pads, turned rotors, serviced rear brakes, rear brakes have 40% life left. *cj
 While driving with cruise control on, when applying the brakes to release the cruise control, there were no brakes. the pedal went to the floor, and did not respond until it was an inch away from the floor. dealer has been contacted. *ak
02/15/1999110/01/1997
 The car was being moved from the front of my house into the driveway. the brakes would not engage to make the turn, instead vehicle accelerated. my son was driving and he turned the steering wheel to the left to try to slow it down. he then panicked and jumped out. the car proceded to continue crashing through our neighbor's chain link fence, continued through his yard. then crashed through the fence on the other side, ending up back in our yard and hitting another car parked in our yard, as well as a trampoline, and ended up hitting the corner of the garage which stopped it. *ak
 Abs warning light remains illuminated, indicating malfunction within the system. also when applying the brakes the pedal travels to the floor, causing extended stopping distance. cause unknown. please give any further details. *ak
05/26/19953
 Brakes continually causing extreme vibration, pads and rotors repaired however continues to vibrate.
102/10/1993
 Brakes vibrate at speeds of 45 mph or higher.
05/11/1998109/01/1997
 Brake reservoir switch failed. (qcaw)
07/30/1996110/01/1993
 Brakes failed. *dh
01/11/19961
 Brakes squeak. *sd
04/25/19961
 Chronic brake problem: brake pedal becomes very hard and braking capacity is greatly reduced (other vehicle from 503668). *ak
04/25/19961
 After vehicle was parked for a period of time, the brake pedal became very hard and braking is greatly reduced. *ak
12/12/1995
 While vehicle opened throttle position, applied brakes to stop vehicle impact 11:00 position, speed 30 mph. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
05/15/1998
 Rotors are warped, the vehicle has been inspected two times. mechanic states that the pads may be overheating, and cannot take the heat. dealer cannot duplicate the problm. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
03/27/19967
 Front brake calipers locked up, causing damage to left front disc. *dsh
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
05/26/19953
 Brakes continually causing extreme vibration, pads and rotors repaired however continues to vibrate.
05/02/1995103/12/1994
 Brake pads failed, rear radius arm weld failure resulting in noise.
1
 Brake pads failed.
10/18/1995110/07/1993
 Brake pads replaced.
04/17/19951
 Replaced front brake pads. *ak
 Right rear inner part where disc pads are worn 50% more than front. please describe details. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
01/01/19980
 While driving front of car shaking upon stopping. also, brake rotors had to be replaced. *ak
05/26/19953
 Brakes continually causing extreme vibration, pads and rotors repaired however continues to vibrate.
09/14/1998
 There was alot of vibration in the steering of the vehicle. the front left rotors were replaced twice, and the promblem is still there. the consumer had to put the vehicle in the shop, and the body shop doesn't know what the problem is. *ak
05/01/1994308/01/1993
 Consumer complaining of rotors being replaced three times within a five year period. vehicle has been in/out of dealer shop for repairs, but condition still occurs. dealer informed consumer that the rotors are warped due to pads overheating. rotor had been replaced twice by dealer, and now need to be replaced again. *ak vehicle has wind noise around doors. *slc
3
 Brake rotors failed.
05/02/1994508/01/1993
 Brake rotors failed 5 times.
 When applying the brakes there is a jerking, took to dealer and replaced the rotors; also, realigned the rear brakes. *ak
11/01/19952
 Warped front brake rotors, causing vehicle to pulse/vibrate when braking from speed of 30 mph. *ak
09/01/19953
 Front brake rotors failed three times, causing vibration at braking, making vehicle unstable at slippery road surfaces. *ak
04/01/19941
 Warped rotors, causing vehicle to vibrate upon braking. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM
06/15/19991
 Mfr# 93s62 & nhtsa# 93 v 023 000/abs: consumer states that intermittently when the brakes are applied the rear brakes will lock the rear wheels. dealer contacted. feel free to provide any further information.*jb
03/09/1998105/01/1997
 The car now when coming to a stop and turning to the right it locks up hard to turn. and has a huming like low oil, in an old fashion car. the noise speeds up and down with the car . what is up with that window though ? i don't know why my brakes were so worn last time that is just so sad.
 When applying the brakes there is a jerking, took to dealer and replaced the rotors; also, realigned the rear brakes. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - DRUM
01/01/19931
 Brake drums warp every 10000 miles. *dh
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
04/01/199809/02/1997
 Faulty master cylinder switch.
SERVICE BRAKES, HYDRAULIC - POWER ASSIST
09/05/1995
 Very hard pedal; as if, lossing power assist; difficulty stopping. tt