Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, AIR - DISC - ROTOR
984503/02/1998601264Availability of hub-mount brake rotor machining equipment. *yc07/15/1998
SERVICE BRAKES, HYDRAULIC - ANTILOCK
985A603/18/1998601004Some vehicles may cycle when brakes are applied on rough roads or on an incline while making a sharp turn. *yc12/14/2000
9521210/01/199546478The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par04/25/1996
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
967403/25/1996613327Experiencing a squeal noise coming from the rear brakes on some vehicles when braking. *tt06/21/2000
9919409/20/19996090082Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt03/06/2000
985A2003/18/1998601020A squealing noise may come from the rear brakes on some vehicles when braking. *tt06/18/1998
985A1103/18/1998601009Service tip information regarding elimination of sanding rotors and drums. *yc06/17/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
985A1303/18/1998601012The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc06/17/1998
BC889095040104/01/19953031400Unknown11/01/1995
956203/01/199539900Roughness concern during brake application. *tw11/01/1995
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
981401/19/1998605562Subject regarding the availability of hub-mount brake rotor machining equipment. *tt07/09/1999
985A503/18/1998601003Hub-mount brake rotor machining equipment from rotunda is now approved for warranty and service use. *yc06/17/1998
9423511/01/199437731Front disc brake noise while braking. *tw01/06/1995
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
0217609/02/200210008580Lamp-brake-invadvertent disabling of brake shift interlock. *mj08/05/2004

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - ANTILOCK
06/05/1999103/01/1995
 I have had other problems with this car feul pump replaced , new head put on car, transmission screen and filter replaced because of leakage, brakes replaced rotors turned, broken motor mount, rear axle loose. squealing noise on passanger side when turning or going around a curve. the transmission on this car also i think has a problem it hesitates when you first crank up the car it won' t go it acts like you are in neutral for a few seconds then it goes. i have also had some type of collant ring around the timing chain replaced the engine would get hot and start smoking it smelled like anti-freeze . most of the repair work has been done under the extended warrenty but this car does have problems.
03/01/1996310/01/1995
 No summary
SERVICE BRAKES, HYDRAULIC
09/15/20030
 The key insert does not align, have had 2 transmissions in 5 years. (i know to check my fluids) new engine, & the paint is awful. engine, motor, gas, gasps and jerks with me. have had motor mounts replaced, nothing helps. heater coil(?) went out, i have no heat now. we had to bypass. the rest i have not been able to afford to repair. i hate this car. i am worried everytime i get in it that my mother and i are not going to get home. i have had the car towed so many times, the man who does the towing knows me and my car on sight. i will not go more than 30 miles fromt he house. my mechanic even hates the car. i call him an angel, because he has kept it running.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
01/28/2000104/01/1996
 Transmission failed in 1998 at 42000 miles, also have rear brake problems. *ak
10/01/1999108/01/1994
 Anti- lock brake failure warning light illuminated. car was inspected by the servicing dealer and we were instructed to replace the abs computer at a cost of $1,500. failure to do so, reported the service manager, would result in continuing degradation of the braking system to the point of complete failure. i will provide vin information if required for further investigation. with only 29,000 miles on a well maintained car, failure of the braking system was shocking. *ak
10/15/19990
 The abs system experiencing failure which is causing the abs warning light to come on. *yc
08/30/1995
 Abs sensor light would come on. whenever this occurred it caused front wheels, excpept one on right front passenger's side, to lock up. dealer notified, and nothing could be found. seeking help nhtsa in this matter. *ak
05/22/1999203/01/1996
 Car accelerated uncontrollably, brakes applied, but could not stop vehicle; had to put car in neutral to stop vehicle. *ak
05/01/1996
 1,when vehicle idles there is a thumping noise comming from the engine compartment and the smell of gasoline in the radiator . 2. the abs system bounces extremely violently when brakes are applied. 3. cruise control works only when it wants to, as if shorting. 4. a/c died and will not take a charge. *ak
09/15/1998
 Consumer experiencing ongoing problem with rotors going out of round. problem would reoccur within 30000; dealer notified, and informed consumer that the vehicle is out of warranty and the cost must go to consumer. owner took vehicle to mechanic, rotors were turned down. he said that some ford rotors are too sensitive and if someone doesn't tighten the lug nuts properly, the rotors easily distort. *ak *ml
 When driving along and trying to stop the vehicle driver has to pump the brakes hard in order to stop the vehicle. *ak
05/15/1994
 Abs: when applying brakes and hitting bump at same time, pedal comes up in air; pedal hard causing no brakes. tt
04/27/19951
 In a vehicle with abs the vehicle brakes locked up, causing an accident. tt
03/23/1995
 Brake system failure, abs system failure. tt
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
10/15/20011
 Consumer states vehicle had some brake work. *slc
07/02/2002
 Brakes are not working properly, and causing extended stopping distance.contacted dealer. *ak
09/01/1999107/01/1999
 Rear brakes were replaced due to making noise. *slc
02/18/1999104/01/1994
 Hose failed due to incorrect routing - it was worn through by the strut bracket
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
 There is a squeaking noise coming from the vehicle when the brakes are applied while driving at low speeds. dealership has examined vehicle and replaced brake pads and rotors because of normal wear. . please provide any additional information / documentation.*ak
10/31/20010
 While putting on brakes they squeak very loudly. please provide any further information.*ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
11/07/19971
 Brake calipers lock up causing overheating, resulting in damage to rotors and pads.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
09/15/1998
 Consumer experiencing ongoing problem with rotors going out of round. problem would reoccur within 30000; dealer notified, and informed consumer that the vehicle is out of warranty and the cost must go to consumer. owner took vehicle to mechanic, rotors were turned down. he said that some ford rotors are too sensitive and if someone doesn't tighten the lug nuts properly, the rotors easily distort. *ak *ml
108/01/1995
 Brake problems; the brakes warped and the rotors had to be replaced every 3,000 miles or the vehicle is unstopable. there is 46,000 miles on vehicle. ford is aware of problem. problem has not been corrected. *ak the front brake rotors warp every 3000-3500 miles and the dealer replaces the rotors at no cost to the consumer. however, the consumer feels unsafe driving with bad brakes. *yh
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - HOSES, LINES/PIPING, AND FITTINGS
07/17/200484600104/25/1994
 The left rear brake line became clogged with corosion debris and the brake locked.*ak
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM - HOSES, LINES/PIPING, AND FITTINGS
08/15/200485000104/25/1994
 Rear steel brake pipe failed due to corrosion.*ak