Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
VEHICLE SPEED CONTROL
21069904/02/1999605014Conditions with intermittent loss of speed control. *tt05/24/1999
081695REVA10/01/199508-16-9546371Bulletin supersedes technical service bulletin 08-16-95, dated apr. 14, 1995. if the vehicle operator **repeatedly** presses and releases the set button with their foot off of the accelerator (a 'lift foot set' to begin speed control oper04/25/1996
CH08169504/01/199541049Cruise control overshoot/undershoot during initial set speed selection. *tw11/01/1995

Consumer Complaints


Fail datemilesoccurencesPurchase date
VEHICLE SPEED CONTROL
06/30/2000108/05/1999
 Vehicle accelerated unexpectedly, causing unwanted accleration due to the throttle body which has malfunctioned and needed replacing. also, chrysler no longer makes throttle body part. *ak frequent stopping caused the front brakes to over heat and go out completely. yh
05/01/1997107/01/1996
 Prior to transmission failing, the vehicle often lunges forward after stopping at a light or stop sign. while the driver would be stepping on the gas to accelerate, the vehicle does not initially move as it should. it hesitates an then lunges forward.n *ak
06/12/1999
 When driving at any speed the odometer/speedometer malfunctioned, and consumer was unable to use the cruise control. *ak
09/10/1997
 During normal operation destination speed increased up to 70mph. cruise would not return to resume postion during brake application. *ak
01/12/199703/01/1996
 Was driving and vehicle accelerated due to throttle sticking. *ak
06/16/19936
 Speed sensor failed.
04/17/19957
 Right rear wheel speed sensor failed, causing anti-lock brakes to fail intermittently.
09/13/19943
 Sudden acceleration. *tw
04/10/19950
 Sudden acceleration, causing accident. *aw
VEHICLE SPEED CONTROL - ACCELERATOR PEDAL
12/07/1997108/01/1996
 Accelerator stuck causing engine to fail.
VEHICLE SPEED CONTROL - CABLES
08/12/1998
 Accelerator cable and the cruise control cable stripped, causing vehicle to engage in a forceful speed and hold. these are not typical wear and tear and should not happened. had to replace both cables. *ak
 The accelerator cable keeps coming loose, replaced it and it is doing the same thing . please describe . *ak
VEHICLE SPEED CONTROL - LINKAGES
08/12/1998
 Accelerator cable and the cruise control cable stripped, causing vehicle to engage in a forceful speed and hold. these are not typical wear and tear and should not happened. had to replace both cables. *ak