Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SERVICE BRAKES, HYDRAULIC - POWER ASSIST | ||||||||||||||||
97V156000 | TOYOTA MOTOR CO., LTD. | from 07/23/1996 to 02/11/1997 | V (Vehicle) | 18746 | 10/01/1997 | MFR | TOYOTA MOTOR NORTH AMERICA, INC. | 09/17/1997 | 09/18/1997 | |||||||
Defect Summary | Vehicle description: passenger vehicles originally sold or currently registered in the states of alaska, colorado, idaho, illinois, iowa, kansas, maine, michigan,minnesota, montana, nebraska, nevada, new hampshire, new york, noth dakota, south dakota, vermont, wisconsin, and wyoming. a condition can occur where accumulated moisture can temporarily freeze in the brake vacuum hose if the vehicle is used in extremely cold climates for an extended period of time. | |||||||||||||||
Consequence Summary | This can result in the elimination of vacuum assist to the brakes that can increase stopping distances and could lead to a vehicle crash. | |||||||||||||||
Corrective Summary | Dealers will install a new design brake vacuum hose. | |||||||||||||||
Notes | Owner notification is expected to begin october 1, 1997.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact toyota at 1-800-331-4331.also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393. |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR | |||||
SU00200 | 05/05/2000 | 613507 | This bulletin provides service information regarding the removal of the abs speed sensor prior to removal of the rear axle and rear suspension. *mr | 07/20/2000 | |
SERVICE BRAKES, HYDRAULIC | |||||
980616980616 | 07/23/1998 | 601334 | New front brake kits are available to reduce front brake groan noise and grinding noise. *yc | 07/23/1998 | |
SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||||
COM040122597 | 02/25/1997 | 52132 | An alternative method for clearing diagnostic trouble codes (dtc) on 1997 us produced camrys and avalons has been adopted for the bosch abs system. *jd | 07/17/1997 | |
BR00397 | 02/21/1997 | 52241 | Diagnostic trouble code clearance for bosch abs. *jd | 07/17/1997 | |
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||||
980616 | 03/15/2000 | 609480 | Subject on front brake noise 97-98 camry l4. *mjs | 03/15/2000 | |
980616 | 06/16/1998 | 601335 | Subject on front brake noise. 97-98 camry l4. *mjs | 03/15/2000 | |
032999 | 03/29/1999 | 605180 | Brief information regarding front brake noise. *tt | 06/02/1999 | |
BR00199 | 04/23/1999 | 604941 | New front brake pad kits are available to reduce front brake groan or grinding noise on vehicles within certain vin ranges. *tt | 05/20/1999 | |
BR00199 | 03/26/1999 | 604651 | Concerns with front brakes making a groan or grinding noise for vehicles built before certain vin ranges. *tt | 05/07/1999 | |
BR00298 | 08/07/1998 | 602185 | New front brake kits are available to reduce front brake groan noise and grinding noise, or squeak or vibration. *yc | 10/15/1998 | |
BR00298 | 06/15/1998 | 601599 | New front brake kits are available to reduce front brake groan noise and grinding noise, or squeak or vibration. *yc | 08/12/1998 |
Consumer Complaints
Fail date | miles | occurences | Purchase date |
---|---|---|---|
SERVICE BRAKES, AIR | |||
4 | 04/12/1997 | ||
Multiple replacements of brakes. | |||
SERVICE BRAKES, AIR - ANTILOCK | |||
12/06/2002 | 0 | 01/05/2001 | |
Just started raining i was cut off and braked. when i applied the brakes they locked and i hit the middle meridian. | |||
SERVICE BRAKES, AIR - DISC - ROTOR | |||
20000 | |||
The vehicles' front brake rotor continuously whop, and when brakes are applied the front end of the vehicle vibrates. the dealership has turned the rotor 6 times, but problem continues. please provide more details. ts | |||
08/29/1997 | |||
Quite noisy, making rumbling noises and grabbing, when braked with any sort of force, due to poor material in both ft disc brake pads which had been flaking the brakes required that the ft pads be replaced, in addition, ft rotors replaced since the loose material had apparently been cutting into the surface of the rotors. | |||
SERVICE BRAKES, HYDRAULIC | |||
02/28/2008 | 74000 | 3 | 06/13/1997 |
Tl*the contact owns a 1997 toyota camry. while driving 32 mph, the steering wheel locked, the brakes failed, and all the instrument panel lights illuminated. there was no warning prior to the failures. the vehicle lost complete power. the contact turned off the engine for approximately 30 seconds and the vehicle was able to be restarted. the failure has occurred three times. the powertrain was unknown. the current and failure mileages were 74,000. | |||
01/22/2008 | 1 | ||
Failed to stop on highway at 65 mph. the road was icy but the vehicle's abs was not working and the vehicle did not decelerate at all. i steering the vehicle to the ditch. i was lucky of not hitting other vehicles and i was safe. there is a problem with toyota camry's braking, it did not feel right! *tr | |||
08/01/2002 | 39000 | 3 | 11/01/1996 |
Tl*the contact owns a 1997 toyota camry. the contact stated that the engine light has been illuminating intermittently since august of 2002. the vehicle was taken to the dealer three different times for this failure. on the most recent occurrence, the contact was informed that it would cost $5,000 to replace the engine. the engine light currently remains illuminated, however, the vehicle is still being driven. speed was not a factor because the light illuminates as soon as the vehicle is started. the purchase date was unknown. the current mileage was 68,000 and failure mileage was 39,000. the front brakes were cracked and the rotors needed to be machined. the taillight bulb was replaced, the head gasket was leaking. the timing belt was replaced. updated 10/10/07. *jb | |||
The vehicle experienced extended stopping distance while braking. the brake pads were changed at 5000 miles yet the problem re-occurred at 37,000 miles. *nlm | |||
10/23/1999 | 35000 | 4 | 04/12/1997 |
Consumer states that brake light illuminated on the dash indicating brake problem, consumer states took to dealer and they stated brakes needed replacing. consumer states brakes have been changed four times. consumer feels there a defect in the brakes that are being put on vehicle. mr manufacturer stated that the brake system met the satisfactory specifications-declined repair. the consumer requests reimbursement for the elapsed brake work on the date of 8/15/02 in the amount of $659.44. scc | |||
2 | 05/01/1997 | ||
Brakes pulse when pressing pedal. problem still occurred after taking to the dealer to replace brake pads. | |||
06/01/1997 | 3 | 01/01/1997 | |
Brakes make a grinding noise and fail to work properly. the pads were replaced once and cleaned a second time and are currently making more noise. | |||
09/11/1997 | |||
Brakes make a loud ginding, rumbling noise for even moderate braking. it feels like there is a loss of brake efficiency when this happens. | |||
Owner claims that the car has loud sounds coming from the brake area when brakes are applied, it affects the way the car stops. *ak | |||
Calipers and pads have been replaced 4 times vehicle still continues to have braking prolems, cause unknown. dealer cannot fix it. *ak | |||
SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||
03/08/2005 | 1 | 04/14/2002 | |
There is a serious problem with the brakes on the 1997 toyota camry. the brakes on the vehicle does not last for more than three months, and less. *ak | |||
04/01/2002 | 6 | 10/01/2001 | |
Near death experience. brakes have failed at various speeds on numerous occasions originally reported 2 weeks after vehicle purchase. since then have returned 5 times for brake failure still no solution lives have been in jeapardy feel unsafe in vehicle. dealer reluctantly complies with original agreement brakes are under warranty please respond asap. *ak | |||
05/08/2001 | 2 | 03/01/1997 | |
Transmission makes a noise when car is placed in reverse or placed in drive and the engine dies leading to brake failure. | |||
10 | 10/01/2000 | ||
The brakes are constantly squealing, i was told this is normal....the car keeps dying when i am coming to slow down to take right hand turn. has been dangerous problem, i drive through two rotarys, it has stauled around them. i am very concerned. *ak | |||
01/11/2001 | 4 | 06/01/1997 | |
Brakes making a grinding noise. have had replaced three times, the first time under a manufacturer replacement bulletin. the 2nd time the brakes were replaced was in 6/99 (bryan easler toyota...excellent service). third time the brakes were replaced -- 9/2000 at 55,000 miles (toyota of concord). grinding noise has started again -- 4 months after replacement with only 8,000 miles on them. i can't believe i've owned this car 3.5 years and have had to replace the brakes so many times. i believe toyota needs to be held responsible for this problem. a friend, also with a '97 camry, has the same problem. if it were a cosmetic problem, it would be no big deal. but these are brakes -- a major safety factor. any help to get this resolved will be appreciated.*ak | |||
08/03/2000 | 1 | 05/01/1997 | |
When brake pedal was applied, it felt like enough pressure was not being applied. brakes would grab and release. dealer has been contacted. *ak the original rear wheel cylinders were 3/4 and needed to be replaced with 7/8. *yh | |||
05/26/2000 | 1 | 11/01/1996 | |
Phone after 7/26 is 847-836-1632. toyota nor dealer will take any responsibility as their 36 month waranty expired. since i have not had my minor service done at a toyota dealership, they say that i show no loyalty and therefore they have no loyalty to me. i asked how many abs sensors have failed and they give me no reply. very strongly they have written that their responsibility is 36 months and that is it -- period! no safety defect mentione din summary. *ak | |||
09/30/1999 | 09/01/1999 | ||
97 camry 4 cyllinder purchased used (34533 mi) sept, 99. within a week noticed: front grill broken; grinding, scraping noise in front brake system; distinct chunk noise primarily in rt fr wheel well area from macpherson strut (lft noisy also); ca | |||
03/02/1999 | 0 | ||
While driving in rainy conditions consumer tried to put on brakes, and felt the abs kicking. but, vehicle did not stop. *ak | |||
10/27/1999 | 10 | 02/01/1997 | |
No summary listed for above vehicle. *ak | |||
4 | 05/01/1999 | ||
Brakes will lock up,will not release even traveling at high speeds, causing mass vibration on car. unable to stop properly. have replaced brake caliper system professionally 3 times, works for approx 1 month then system fails again. unsafe to drive at speeds over 50 miles per hour. *ak | |||
4 | 05/01/1999 | ||
Brakes lock up, will not release even at high speeds,causing mass vibration or unable to stop properly. have replaced brake calipers, professionally 3 times. worked approximately 1 month and situation started again. 1st indication was blakes were rock hard when compressed. as speed increased, vibration increased. mechanic advised also bolt came loose frm drivetrain, causing boucey effect prior to brake problems. *ak | |||
09/21/1999 | |||
Wheels locked up on two occasions; one on a stop, and the other on a wet pavement. also noticed grinding sound coming from front wheels. vehicle hesitateing while stopping. dealer / manufacturer notified. *ak | |||
05/05/1997 | 5 | 04/01/1997 | |
No summary listed for above vehicle. *ak | |||
10/06/1999 | |||
When the brakes were applied the pedal went to the floor, resulting in extended stopping distance. dealer and manufacturer have been notified. *ak | |||
Upon depressing the brake pedal, consumer noticed a loud grinding noise coming from the front end. consumer has contacted the dealer, dealer has replaced parts. problem still occurs. *ak | |||
Brakes keeps grinding as if it was metal to metal , causing front end to vibrate and extended stopping distance. *ak | |||
1 | 09/01/1997 | ||
Antilock brakes make noise when used. nlm | |||
03/03/1998 | 7 | 09/21/1997 | |
Brakes make a grinding noise and do not work properly, also front shock absorber were installedmexhaust front pipe was installed.*adj *ak | |||
11/23/1996 | 3 | 11/23/1996 | |
Abs brakes failed several times, once resulting in a collision. | |||
07/06/1998 | |||
While applying the brakes there is a grinding sound. dealer has been contacted. *ak | |||
05/15/1998 | 04/17/1998 | ||
When the brakes were applied at a force, not slow stopping, the brakes would make a loud noise, speed at approximately 35 mph. dealer contacted and stated it was normal abs brake noise, and cannot duplicate the problem. *ak | |||
10/09/1998 | 1 | 10/01/1996 | |
I still have the same brake problem and uneven stopping power/grind. | |||
04/07/1997 | |||
Noisy abs brakes. *ak | |||
02/01/1998 | 1000 | 12/01/1997 | |
The front brakes make noise and produce a grinding sound when applied with normal pressure. the dealer stated that toyota knows of the problem but can't fix it. my regular mechanic has had other complaints with toyotas from his customers. i can't understand why it can't be fixed. 2) on my 25,000 mile service i could not have my back tires rotated because they were cupped. i was told this is because of weak shocks on the car. my wife who weighs 100 pounds is the one who drives this car 85% of the time and with my two kids the total weight is less that 300 pounds. i noticed that the car would bottom out but did not expect to have poorly performing shocks. i am very dissatisfied with these two problems to the point that i wonder where else toyota cut corners on quality. if this report is going to toyota, please pass on that the chances of this consumer buying another one of their products is zero. also, the chances of a bad referral is highly probable. at the minimum, it is better than toyota coming up with a solution to a known problem. | |||
02/05/1998 | 1 | ||
Consumer experiencing ongoing problem with front brakes. whenever brakes are applied the brakes sound as if it is metal to metal grinding. vehicle inspected, and brakes pads have been replaced three times, and condition still a occurs. *ak | |||
05/05/1998 | |||
The consumer has been experiencing problems with anti-lock brake system. when applying brakes, it makes a loud chattering noise. vehicle has been serviced 3 times for brake problems since the vehicle was purchased feb/97. the manufacturer has not been contacted. *ak | |||
10/01/1997 | 3 | ||
Ongoing problem with the brake system. anytime vehicle is on an incline vehicle would go foward after releasing the brake pedal. vehicle been in/out of dealer shop on three occasions, and condition still unresolved. *ak | |||
When brakes are applied, mostly in wet weather conditions, vehicle does not want to stop. also brakes make growling noises when brakes are applied. in addition, vehicle has visual problems; headrest , blocks view when looking out of rear window. problem is with all 4 headrests. headrest are too wide and high. possible design flaw. dealers are aware the problem. please provide any further deatails. *ak | |||
07/31/1998 | 06/01/1997 | ||
Intermittently when brakes are applied there is a loud grinding noise coming from the front brakes, restuling in extended stopping distance. the dealer has inspected vehicle twice. *ak | |||
08/14/1998 | |||
Consumer experiencing brake problem when vehicle brake system get hot. vehilce would make a scrapping sound ; dealer notified and informed consumer that nothing could be found, and that was a normal condition for new brakes. *ak | |||
1 | 07/01/1997 | ||
Abs would not stop completely causing accident | |||
01/11/1998 | 6 | ||
While driving vehicle about 40 to 45 mph when the consumer stepped on the brake pedal, the brakes sounded like grinding metal to metal. dealer had said: the problem had been reported more the one time, but manufacturer had not recalled this problem. manufacturer not contacted. *ak | |||
04/15/1997 | |||
When applying abs brakes and coming to full stops, brakes have a loud grinding noise. the noise is intermittent. *ak | |||
02/18/1997 | 4 | ||
Whenever the brakes were applied, vehicle would not stop right away. would make a grinding noise each time brakes are applied. talked to dealer & manufacturer, but nothing will be done. *ak | |||
A grinding noise occurs within the abs braking system. dealer states the brakes are working properly. however, a part is being manufactured to remedy the grinding. also on one occasion when applying the brakes in normal conditions, the pedal traveled to the floor , causing extended stopping distance. *ak | |||
04/07/1997 | |||
Upon applying brakes hears a noise coming from right front passenger's side. both toyota and dealer were contacted, they claim that noise is normal for 1997 toyota camrys. *ak | |||
07/06/1997 | 0 | ||
While driving vehicle on the road about 40-45 mph with about 4 vehicles in front of the comsumer when he saw the vehicles stop, and comsumer tried to stop by stepping on brake pedal, but could not stop it on time and smashed front of vehicle or rearended. air bags did not deploy during the accident. the shop said it was nothing wrong with the system. *ak | |||
11/29/1996 | 4 | ||
Could hear grinding noise when applying brakes at 40mph; took to dealer & mechanic took for test drive; had same problem; had calipers, pads & rotors replaced. problem still exists. *ak | |||
When applying the abs brakes in any type of weather or speed, the brakes make a grinding noise and there is extended stopping distance. please provide details. *ak | |||
SERVICE BRAKES, HYDRAULIC - FLUID | |||
11/01/1997 | 1 | 10/18/1996 | |
Brake system failed as a result of contaminated brake fluid. | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||
05/25/2000 | 3 | ||
Since purchasing the vehicle, the consumer has experienced problems with the right front brakes, the brake shoes break and have to be replaced every 10 to 15 thousand miles. *slc | |||
02/09/2000 | 1 | ||
The brakes grrind. nlm | |||
1 | 06/01/1997 | ||
Brakes, drums and rotors have been replaced, adjusted or repaied due to problems with grinding, warping, squealing and brake loss, the vehicle does not stop safely at times. nlm | |||
10/22/1999 | 3 | 04/01/1998 | |
The braking system has been a problem every since i bought the car. it makes a lot of noise. sometimes grinds and vibrate. i have had it to the dealer 4 times for this problem. they have done work to them once. they tell me every is to code. on friday october22, 1999 they failed on me. dealer says because the can not duplicate the problem they can not fix it. they cant find anything. the vehicle is not safe. | |||
1 | 02/01/1997 | ||
Brakes makes squeaking noise. yh | |||
10/31/1998 | 1 | 02/16/1997 | |
Brakes failed. yh | |||
11/01/1996 | |||
Brakes failed causing excessive amount of noise. yh | |||
1 | 11/08/1996 | ||
Brakes make noise. yh | |||
1 | 09/01/1997 | ||
Brakes making a lound grinding noise. nlm | |||
1 | 05/01/1997 | ||
Brake pads failed causing noise. yh | |||
1 | |||
Brakes failed. *yc | |||
04/01/1997 | 4 | ||
Defective braking system, causing a grinding noise and extended stopping distance. dealer had to replace brakes set 4 times. please provide further information. *ak | |||
03/03/1998 | 7 | 09/21/1997 | |
Brakes make a grinding noise and do not work properly, also front shock absorber were installedmexhaust front pipe was installed.*adj *ak | |||
11/24/1998 | |||
Vehicle expriencing ongoing problem with brake system squeaking while stopping or making a turn. vehicle been in/out of dealer shop on two occasions for repair and parts replacement. but squeaking still occurs. seeking nhtsa help in this matter. *ak | |||
06/01/1997 | |||
While braking vehicle makes a grinding noise, and there is extended stopping distance which may cause an accident. also, dealer replaced brake pads and rotated the rotors, but problem still exists. please provide further information and vin#. *ak | |||
1 | 01/31/1997 | ||
Brakes making noise. | |||
12/01/1998 | 1 | 12/01/1998 | |
Had foot firmly on brake, changed gear from park to reverse, and while foot was still on brake the car started rolling and continued to roll until it hit a tree. | |||
07/01/1998 | |||
While driving the vehicle pulls to the left lane. also, while braking the vehicle pulls to left which may cause an accident. been to dealer several, cannot determine problem. in addition, when the window is wet the occupant cannot see through the window. please provide details. | |||
04/24/1998 | 1 | 07/01/1997 | |
Brakes failed during a collision. air bag did not inflate properly resulting in injuries. | |||
01/22/1998 | |||
When driving the vehicle the brakes went out and then caught on fire in the engine compartment. the vehicle has been totalled. *ak | |||
03/17/1997 | 4 | ||
While driving & had applied the brakes, a loud, grinding noise could be heard. took it back to dealer & informed nothing was wrong 1st time. the 2nd time noise heard, was informed a crack developed in front brakes & it was repaired. the 3rd time, noise heard again & again the mechanic said nothing was wrong. *ak | |||
10/04/1997 | 0 | ||
When consumer comes to a stop brakes grind. mechanic has told her after 4 times, in for repair, that is normal. consumer states metal to metal grinding is not normal. *ak | |||
The brakes on vehicle are grinding. the grinding started around 800 miles. manufacturer will be contacted. *ak | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC | |||
11/19/2001 | 1 | ||
Consumer states an on going problem with vibration while driving 70 mph. vehicle taken to dealer. they replaced front rotors and pads, within six month or less the problem is reoccurring. feel free to provide any further information.*jb | |||
05/01/1997 | |||
Brakes are inadequate and unsafe. if brakes are applied at high speed the discs warp so the brakes pulsate and lose stopping ability. this is especially dangerous in mountain driving or when brakes are needed for a quick strop on high speed interstate highways.*ak | |||
01/05/2001 | 1 | ||
Brake pedal was going to the floor, dealer repaired front brakes. consumer stated there is a noise in the front of the vehicle, dealer states 2 front struts need replaced, also axle boots leaked and dealer replaced. vehicle was hard to start and then would die, dealer replaced the isc valve. water pump leaked and was replaced. *slc | |||
07/01/1999 | 2 | 07/01/1997 | |
Front brakes make a grinding noice. dealer replaced a 2-page list of parts at 22k miles. the noise is back at 44k miles. any advise?*ak | |||
09/30/1999 | 09/01/1999 | ||
97 camry 4 cyllinder purchased used (34533 mi) sept, 99. within a week noticed: front grill broken; grinding, scraping noise in front brake system; distinct chunk noise primarily in rt fr wheel well area from macpherson strut (lft noisy also); ca | |||
05/05/1997 | 5 | 04/01/1997 | |
No summary listed for above vehicle. *ak | |||
12/29/1997 | 2 | 09/01/1997 | |
Front brakes and rotors make vibration noise. yh | |||
07/01/1997 | 07/01/1997 | ||
Ever since i purchased this car in 1997 the front disc brakes have made a groaning sound and slipped during hard braking. i took the car in at 20,000 miles and was told that this was an inherent problem with the brakes on these vehicles and nothing could be done about it. i just checked with the dealer to have a brake job (at 34,500 miles) and was told that this problem was widespread with these vehicles. apparently the metallic disc brake pads just do this. toyota is offering free repairs (for example see web page http://www.symespasadena.com/symes1.htm) for this problem, but only by replacing the metallic brake pads with ones that are so soft that the brakes only last for about 8,000 miles. this is a potentially serious problem, this is the most widely sold car in the country. the defective brakes do not just make a noise, they slip and fail to grab when hard-braking the vehicle. *ak | |||
06/01/1997 | |||
While braking vehicle makes a grinding noise, and there is extended stopping distance which may cause an accident. also, dealer replaced brake pads and rotated the rotors, but problem still exists. please provide further information and vin#. *ak | |||
When applying the brakes the pedal went most of the way down and there was a thumping sound. dealer has replaced the pads and the rotors. has been to dealer 5 times. *ak | |||
2 | |||
Brake problems; when applying the brakes there is a grinding noise. the rotors and the pads have been replaced twice since purchasing vehicle in june of 1997. the pads and rotors are being replaced a 3rd time by dealer. *ak | |||
09/01/1997 | 2 | 02/10/1997 | |
Front end makes a terrible grinding noise upon applying brakes at relatively low speeds. *ak | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER | |||
4 | 05/01/1999 | ||
Brakes will lock up,will not release even traveling at high speeds, causing mass vibration on car. unable to stop properly. have replaced brake caliper system professionally 3 times, works for approx 1 month then system fails again. unsafe to drive at speeds over 50 miles per hour. *ak | |||
4 | 05/01/1999 | ||
Brakes lock up, will not release even at high speeds,causing mass vibration or unable to stop properly. have replaced brake calipers, professionally 3 times. worked approximately 1 month and situation started again. 1st indication was blakes were rock hard when compressed. as speed increased, vibration increased. mechanic advised also bolt came loose frm drivetrain, causing boucey effect prior to brake problems. *ak | |||
11/01/1998 | 1 | 01/01/1997 | |
Brake calipers failed. | |||
02/05/1998 | 1 | ||
Consumer experiencing ongoing problem with front brakes. whenever brakes are applied the brakes sound as if it is metal to metal grinding. vehicle inspected, and brakes pads have been replaced three times, and condition still a occurs. *ak | |||
2 | |||
Brake calipers failed. | |||
11/29/1996 | 4 | ||
Could hear grinding noise when applying brakes at 40mph; took to dealer & mechanic took for test drive; had same problem; had calipers, pads & rotors replaced. problem still exists. *ak | |||
Calipers and pads have been replaced 4 times vehicle still continues to have braking prolems, cause unknown. dealer cannot fix it. *ak | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS | |||
05/27/1998 | 2 | 03/20/1997 | |
Brakes pads wore too fast, and the replacement wore too. yh | |||
08/29/1997 | 1 | 07/04/1997 | |
Brake pad material was flaking off resulting in damage to rotors also. | |||
10/08/1998 | 1 | 10/10/1996 | |
Brake pads replaced due to grinding, resulted in right side calipers failing/inside pad grounding into rotor. | |||
Brake pads wear prematurely. this is a commom problem for 1996-1998 model camrys. | |||
08/01/1997 | 1 | 02/01/1997 | |
Brake pads making grinding noise. | |||
11/29/1996 | 4 | ||
Could hear grinding noise when applying brakes at 40mph; took to dealer & mechanic took for test drive; had same problem; had calipers, pads & rotors replaced. problem still exists. *ak | |||
Calipers and pads have been replaced 4 times vehicle still continues to have braking prolems, cause unknown. dealer cannot fix it. *ak | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR | |||
10/29/2002 | 49000 | 1 | |
Nar 03-27-2003 mr the consumer had only 49000 miles on the vehicle when the rotors had to be replaced. over $400.00 in repairs made. *cb | |||
02/15/2003 | 1 | 07/01/1997 | |
The front brake rotors were worn, which caused the vehicle to experience extended stopping distance.also check engine light has been on since 45,000 miles.*jb *ts | |||
1 | 01/30/1997 | ||
Recall was performed on vehicle, shortly after a brake drum needed resurfacing. *slc | |||
12/29/1997 | 2 | 09/01/1997 | |
Front brakes and rotors make vibration noise. yh | |||
08/29/1997 | 1 | 07/04/1997 | |
Brake pad material was flaking off resulting in damage to rotors also. | |||
11/29/1996 | 4 | ||
Could hear grinding noise when applying brakes at 40mph; took to dealer & mechanic took for test drive; had same problem; had calipers, pads & rotors replaced. problem still exists. *ak | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM | |||
10/27/1999 | 10 | 02/01/1997 | |
No summary listed for above vehicle. *ak | |||
10/01/1998 | 1 | 10/01/1998 | |
Front brakes failure caused rubbing noise when wheels were turning. yh | |||
02/02/1998 | 3 | 11/01/1997 | |
Brakes makes lots of noise | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - WHEEL CYLINDERS | |||
08/03/2000 | 1 | 05/01/1997 | |
When brake pedal was applied, it felt like enough pressure was not being applied. brakes would grab and release. dealer has been contacted. *ak the original rear wheel cylinders were 3/4 and needed to be replaced with 7/8. *yh | |||
07/03/1998 | 1 | 01/23/1997 | |
Rear wheel cylinder brake kit repair. yh | |||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER | |||
07/07/2000 | 3 | ||
Master cylinder has been replaced three times already, but the problem still has not been remedied.*ak | |||
SERVICE BRAKES, HYDRAULIC - POWER ASSIST | |||
02/10/2001 | 37177 | 1 | 02/10/2001 |
There is a significant amount of play and body roll with respect to the steering components/steering wheel of the vehicle. this has existed from date of purchase. additionally, the braking system is not as responsive as that which i have experienced in all other vehicles. the depth which the brake pedal must be depressed is much deeper and requires a greater amount of pressure, than that of any other vehicle i have driven. finally, the headlights provide poor visibility both in the amount of light emitted and in their low mounting or angle which they sit at. thank you for your time and efforts on my behalf. best regards. *jb | |||
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - VACUUM - HOSES, LINES/PIPING, AND FITTINGS | |||
06/12/2002 | |||
Brakes failed while parking. vehicle jumped foward and consumer hit a meter. took vehicleto dealer, and they stated that there was recall 97v156000 for brake vacuum hose. please provide any further information.*ak | |||
01/21/2001 | 1 | 09/17/2000 | |
Moisture build up and froze brake vacuum hose. this caused increased stopping distance, resulting in a collision. vehicle not included in recall 97v156000. *ak *slc |