Bmw K1200 S 2004
Model K1200 S made in 2004 by Bmw got 1 consumer complain there are 2 recalls as well as 7 service bulletins. Consumer complaints with reference to service brakes, hydraulic. . Technical service bulletines regarding engine and engine cooling, exterior lighting and fuel system, other. There were some recalls concerningengine and engine cooling, suspension.
Model 2004
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ENGINE AND ENGINE COOLING | ||||||||||||||||
| 07V066000 | BMW OF NORTH AMERICA, LLC | from 04/01/2003 to 01/31/2007 | V (Vehicle) | 6631 | 04/10/2007 | MFR | BMW OF NORTH AMERICA, LLC | 02/23/2007 | 02/23/2007 | |||||||
| Defect Summary | On certain motorcycles, frequent short trips particularly during cold temperatures, can cause water to accumulate in the oil tank, and when the engine is running, escaping water vapor can condense on the oil tank air bleed valve. in freezing temperatures, this water could freeze and block the air bleed valve. | |||||||||||||||
| Consequence Summary | It is possible that a pressure build up in the oil tank could cause it to rupture, allowing oil to leak onto the rear tire. an oil leak could cause a fire. oil on the rear tire could cause loss of control. | |||||||||||||||
| Corrective Summary | Dealers will install a new oil tank cap containing a valve to prevent overpressure in the tank free of charge. the recall began on april 10, 2007. owners may contact bmw at 1-800-831-1117. | |||||||||||||||
| Notes | Customers may contact the national highway traffic safety administration | |||||||||||||||
| SUSPENSION - FRONT - WHEEL BEARING | ||||||||||||||||
| 10V488000 | BMW OF NORTH AMERICA, LLC | from 10/01/2003 to 09/30/2010 | V (Vehicle) | MFR | BMW OF NORTH AMERICA, LLC | 10/08/2010 | 10/14/2010 | |||||||||
| Defect Summary | Bmw is recalling certain model year 2004-2010 motorcycles. the bearings could be subject to corrosion. this could lead to reduced movement of the link lever. | |||||||||||||||
| Consequence Summary | This could affect the handling of the motorcycle increasing the risk a driver may lose control of the vehicle resulting in a crash. | |||||||||||||||
| Corrective Summary | The manufacturer has not yet provided a remedy or an owner notification schedule for this campaign. owners may contact bmw at 1-800-525-7417. | |||||||||||||||
| Notes | Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov . | |||||||||||||||
Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| ENGINE AND ENGINE COOLING - ENGINE | |||||
| 13-003-07 | 12/01/2007 | 10026229 | Bmw motorcycle: idle speed too high. the cause is incorrect idle air metering by the idle actuator. *pe | 10/08/2008 | |
| EXTERIOR LIGHTING | |||||
| SIB-63-02-01 | 08/01/2010 | 10037025 | Ready | 04/27/2011 | |
| SIB-63-02-01 | 08/01/2010 | 10037025 | Bmw: procedure for determining and replacing incandescent and halogen light bulbs under warranty. *rm | 04/27/2011 | |
| FUEL SYSTEM, OTHER | |||||
| SB-00-021-07 | 11/01/2007 | 10030825 | Bmw motorcycle: engine fuels containing ethanol. bmw motorrad has no objection to the use of si engine fuels containing up to a maximum of 10% ethanol and imposes no warranty restrictions. ethanol mixtures in proportions higher than 10% | 12/07/2009 | |
| SERVICE BRAKES, AIR - DISC | |||||
| SB-17927831-02 | 02/25/2009 | 10029706 | Bmw motorcycle: wheel speed dependent, clearly audible clanking noise occurs when braking to adjust speed. e series (k25; k25/02; k25/03; k25/11; k25/12; k25/hp; k26; k27; k28; k29; k29/hp; k40; k41; k43; k43/hv; k44; k589/03; k71). no mod | 07/13/2009 | |
| SUSPENSION | |||||
| 33-001-08 | 03/01/2008 | 10026305 | Bmw motorcycle: conversion of rear esa spring strut from potentiometer to hall sensor. *pe | 10/16/2008 | |
| SUSPENSION - REAR - SPRINGS | |||||
| SIB-61-001-08 | 03/01/2008 | 10027805 | Bmw motorcycles: esa rear spring strut cannot be calibrated with the gt1, cip error 14007. all models with esa, except r1200r (k27), r1200gs (k25/11) and r1200gs adv. (k25/12). model years unknown. *pe | 02/09/2009 | |
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||
| 06/01/2006 | 43000 | 10 | 08/27/2005 |
| Tl* -the contact stated that there was a loud noise coming from the back of his motorcycle a 2004 bmw k1200 s. the contact took the motorcycle to a dealer and was told that the rivets on the rear brake assembly were separating from the anti- lock braking system. the mechanic told the contact this was a common problem with bmw motorcycles. the bmw dealer said that they would pay for the parts, but not the labor. the 2004 k1200 bmw motorcycle has 43,000 miles. *jb | |||
Car dealers selling
| State | City | Zip | Name | Phone |
|---|---|---|---|---|
| FL | ORLANDO | AAI MOTORCYCLES OF ORLANDO | 407-826-4269 |