Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SUSPENSION
040310007D11/01/2005040310007E1001119720 inch wheels and tires available through gmspo. *tt updated. *nm01/10/2005
03031600106/01/2007030316001A10004767Diagnostic information for tire pressure monitoring (tpm) system which may set diagnostic trouble code (dtc) c0760 and/or c0765. *tt updated 08-15-07. *kb01/06/2004
03031000101/01/2008030310001D10000959Tire slowly goes flat and/or excessive wheel vibration caused by bead splits (replace wheels with new heavy duty rim version) *tt *ar updated 4/11/08. *nj04/09/2003
SUSPENSION - FRONT - CONTROL ARM - UPPER ARM
06030800203/01/200610019852Revised upper control arm replacement. *tt05/05/2006
SUSPENSION - FRONT - SPRINGS - LEAF SPRING ASSEMBLY - U-BOLT, LEAF SPRING TO AXLE
334009/23/20063340C10020874Left front axle shaft difficult to remove. axle differential leak seal shaft. *kb01/25/2007
SUSPENSION - REAR
PIP4054A02/01/2008PIP4054B10024345Eaton locking differential chatter shudder noise on turns, equipped with a locking rear differential rpo g80. *nj updated 7/17/2008. *pe04/07/2008
SUSPENSION - REAR - AXLE - NON-POWERED AXLE ASSEMBLY
35693569B10017308Service vme - 8.6 inch rear axle which exhibit a gear whine condition (until december 23, 2005). *tt11/02/2005
SUSPENSION - REAR - SPRINGS - LEAF SPRING ASSEMBLY
03030900207/01/2007030309002B10005181Rear leaf spring slap or clunk noise (replace spring inserts) *tt updated 10/18/07. *nj02/11/2004

Consumer Complaints


Fail datemilesoccurencesPurchase date
SUSPENSION
10/14/20066020912/01/2005
 2006 yukon makes a clunking noise when turning the wheel, vibration is also noticed when driving 65 mph. *ts a month after the vehicle was purchased the consumer started to noticed noises coming from the front end. the vehicle was taken to service dealer who determined that the upper and lower control arms needed to be replaced. after repairs of the control arm the vehicle started to vibrate. the vehicle was returned and they replaced the right front tire which they claimed was defective from the factory. one week later the consumer noticed a clunking noise in the front end. the vehicle was returned to the dealer who advised that the right rear upper and lower control arm were bad from the factory. the parts were ordered and replaced. when the vehicle was at the dealer being serviced the technician didn't cover the seat while working and got oil on the seat and steering wheel. the dealer replaced the entire seat with a seat on their lot. the consumer never authorized them to do that. now the seat is making a clunking noise. the vehicle was returned to the dealer who claimed that the seat is broken and that all the 2006 yukon denali seat are broken. the sear was taken apart and longer bolts were used to secured the seat. the seat is still broken. the dealer also replaced the steering wheel which is now making noise. the dealer said that the steering box needed to be replaced but that the replacement is noisier than the original. the dash has begun to peel. the dealer indicated that all yukon denali dashes are peeling. the dash was replaced with a new one. the engine sounds as is a lifter is off. the vehicle pulls to the left.