Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
ITB00063A11/01/2000ITB00063618443Subject regarding brake judder. *tt04/12/2001
ITB0001202/11/2000610381Experiencing a loud, low frequency groan noise coming from the front brakes during stopping. *tt04/26/2000
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
ITB00063B05/24/2002ITB00063A635083Information on brake judder. *tt10/17/2002

Consumer Complaints


Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - DISC - ROTOR
01/20/200315281410/19/1999
 Vehicle rotors have warped four times needing resurfacing each time. this problem happens every fifteen thousand miles. this is not normal. the first time they warped was at 15,281 miles,then at 32,555,49,767 now the problem has surfaced again at 61,434 miles. does the resurfacing of the rotors compromise the strength of the rotors? how many times can this be done?
SERVICE BRAKES, HYDRAULIC
06/27/2002160681312/04/1999
 Tl*- the contact owns a 2000 infiniti i30. the service engine light remained illuminated. the dealership informed the contact a sensor or a coil needed to be replaced. the dealership made the repairs. there was another occurrence approximately 3 years later. the dealership replaced the coil pack. three months later the vehicle began to rough idle. the dealership informed the contact this was a normal occurrence, and they were unable to improve idling. the current mileage was 43,000. *ak the consumer states ses tsb or recall information was hidden from consumer and denied of such. the consumer provided various invoices of diagnostics and repairs. the front brakes were worn, the vehicle pulled to the left, the winshield wiper inserts were replaced, the drive belts were worn and cracked , the transmission shifter felt stiff, the 02 oxygen sensor was replaced the ignition coil was replaced update 4/25/07*tr
SERVICE BRAKES, HYDRAULIC - ANTILOCK
03/10/200011
 Vehicle experienced rough and bumpy ride after the first 1000 miles. problem with transmission not changing gears porperly, and would jerk when shifting. also, extended stopping distance, and brake pedal would go too far to the floor before vehicle would come to a complete stop. vehicle has been in/out of dealer shop on 11 occasions, and problem still reoccurring. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
01/31/2000301/22/2000
 Premature wear of brake rotors due to warping caused brakes to shutter when applied. dealer has replaced pads and rotors three times. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
06/05/200628000510/23/2003
 Rear brake rotors warp. i have resurfaced several times only to have the shudder start back up with in weeks. *jb
04/01/200510
 Consumer had to have 2000 infiniti i30 rotors resurfaced. *mr on several occasions, the rotors were resurfaced. all four rotors were replaced at 39,868. at 62k miles the vehicle began to vibrate at 55 mph. other problems: the transmission stayed in the low gear too long, there was squeaking on the right side of the vehicle when on rough roads, vibration in the steering due to the rotors being out of round, the front window squeaks and the rear view mirror was loose. *sc *jb
609/01/2000
 Rotors turned 3 times ,warped hub replaced. brakes shutter , shake when applied. *ak
09/01/2001
 When braking theres a hesitation. took vehicle to dealer, and they stated it was dust. year later, dealer stated that rotors needed to be turned. dealer turned rotors, and 15000 miles later, rotor needed to be turned again. please provide any furthr information.*ak