Recalls

CampaignManufacturerManufacturing dateType# of units affectedDate Owner notified MfgRecall Initiated byManufacturers of recalled vehicles/productsReport Recieved DateRecord Creation DateRegulation Part NumberFMVSS Number
SERVICE BRAKES, HYDRAULIC
06E022000BRAKE PARTS, INC. E (Equipment)744003/20/2006MFRFORD MOTOR COMPANY03/13/200603/13/2006
Defect SummaryCertain aftermarket brake hydraulic master cylinders sold as replacement brake cylinders for certain ford, daimlerchrysler, and jeep passenger vehicles. these brake cylinders were sold under the brand names of napa, raybestos, aimco, ac delco, carquest, bendix, and wagner. only products that were manufactured from july 27, 2005 through january 17, 2006 (date codes 0529 through 0602) are subject to this recall. when subject to very cold temperatures, an internal seal in the master cylinder could lose flexibility and may cause brake fluid to leak.
Consequence SummaryLoss of brake fluid can lead to a decrease in brake line pressure and an increase in stopping distance, which can result in a vehicle crash.
Corrective SummaryAffinia (brake parts, inc.) will replace the subject brake hydraulic master cylinders free of charge. the recall began on march 20, 2006. owners can contact affina group customer service at 1-800-323-0354.
NotesThis recall only pertains to aftermarket napa, raybestos, ac delco, aimco, carquest, and bendix brake hydraulic master cylinders and has no relation to any original equipment installed on daimlerchrysler or ford vehicles.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
00V075000FORD MOTOR COMPANYfrom 04/01/1996 to 08/24/1998V (Vehicle)43620010/11/2000MFRFORD MOTOR COMPANY03/09/200003/14/2000
Defect SummaryVehicle description: passenger vehicles not equipped with the anti-lock braking system (abs). a pressure conscious reducing valve (pcrv) in the rear brakes may be subject to corrosion and result in malfunction, when operated in areas that use salt compounds on the roadway for de-icing or dust control.
Consequence SummaryIf both pcrv's malfunction, vehicle handling could be adversely affected during braking as a result of the rear wheels locking, increasing the risk of a crash.
Corrective SummaryDealers will install improved pcrv's in the rear brake system. this recall was expanded in september 2000 to include 1999 and 2000 ford contour, mercury mystique and cougar vehicles.
NotesOwner notification began april 3, 2000 for the 1996-1998 model vehicles and on october 11, 2000, for the 1999-2000 model vehicles.owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1-800-392-3673. also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Bulletins

BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
SERVICE BRAKES, AIR - ANTILOCK - WHEEL SPEED SENSOR
98321602/13/1998607431Some vehicles may exhibit multiple wheel speed sensor codes. *tt09/23/1999
SERVICE BRAKES, AIR - DISC - ROTOR
984503/02/1998601264Availability of hub-mount brake rotor machining equipment. *yc07/15/1998
SERVICE BRAKES, HYDRAULIC - ANTILOCK
98030904/01/1998603503Information regarding multiple abs codes. *yc02/23/1999
BC0300A9702002/01/199751594Multiple abs codes. *tw06/27/1997
9521210/01/199546478The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par04/25/1996
SERVICE BRAKES, HYDRAULIC - ANTILOCK - ABS WARNING LIGHT
BC020197020101/02/199751071Abs light on/wheel speed sensor codes may be caused by corrosion of terminals. *jd06/27/1997
BC100869702001/02/199751138Abs light on/wheel speed sensor codes may be caused by corrosion of terminals at the hcu and wire harness 22 pin connector. *jd06/27/1997
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
00S0309/01/2000618580Safety recall pertaining to brake pressure control reducing valve replacement. *jb04/17/2001
1270705/01/19996091681Some vehicles may exhibit a front brake groan. *tt11/09/2000
620105/01/1999607020Experiencing a front brake groan during city driving. *tt11/03/2000
9919409/20/19996090082Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt03/06/2000
998905/03/1999606409Some vehicles may exhibit a groaning noise from the front brakes during city driving. *tt08/19/1999
985A1103/18/1998601009Service tip information regarding elimination of sanding rotors and drums. *yc06/17/1998
9622210/21/199650941Brakes - elimination of sanding rotors and drums - service tip. *tw06/17/1997
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
985A1303/18/1998601012The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc06/17/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS
BC050396111111/11/199650769Improved front brake pad. *tw06/17/1997
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
981401/19/1998605562Subject regarding the availability of hub-mount brake rotor machining equipment. *tt07/09/1999
985A503/18/1998601003Hub-mount brake rotor machining equipment from rotunda is now approved for warranty and service use. *yc06/17/1998
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - SHOES/LININGS
98308102/26/1998607373Concerns with incorrect brake shoe / lining assembly. *tt09/21/1999
SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT
0217609/02/200210008580Lamp-brake-invadvertent disabling of brake shift interlock. *mj08/05/2004
BC010096010212/01/199546425Discharged battery or brake lights stuck on may be caused by a mal- adjusted brake light switch.04/25/1996

Consumer Complaints

Fail datemilesoccurencesPurchase date
SERVICE BRAKES, AIR - DISC - ROTOR
06/21/1998203/01/1996
 Front brake rotors wear excessively because the vehicle's minimum tolerance of 840 and 865 are less than the manufacturers specified minimum tolerance of 874.
SERVICE BRAKES, HYDRAULIC
05/15/20030
 I replaced the alternator last summer and i had to replace it again this summer. i had to replace my tail lights twice the brakes is always giving me problems. the window on the drivers side doesnt roll down. when it rain the floors get wet. i have a hard time putting it into gear and taking it out of gear. it stalls to cut on and drives really rough.i had to replace the tires numerous times.the speedometer went out and the temperture gauge as well.the ac dosent work and it takes a while for the heat to warm up car.something need to be done about this.
SERVICE BRAKES, HYDRAULIC - ANTILOCK
07/22/199907/01/1997
 Transmission failure 2 years after car was purchased, engine replaced 2 years after purchase. hub bearing assembly broke 1 year after purchase of car. car drives extremely hot - to near over heating point. trunk leaks when it rains. driver side window malfunctioning. instrument panel malfunctioned (was fixed before recall). check engine light stays on constantly even after tune up/ major work done.
05/17/1999109/14/1998
 While driving rear wheels locked up and power steering malfunctioned, causing loss of most steering ability. also, vehicle stalled unexpectedly due to defective transmission, almost causing a crash. *ak *ml
08/01/199804/09/1997
 Abs wiring replaced/rotors worn out before pads/master cyliner replaced, and grinding noise with good pads. *ak
08/27/1996
 Abs brake failure.
03/15/19965
 Owner claims that the car rotor's wear down quickly. she has to replace them every month. *ak
06/02/1997
 Brakes: when driving and attempting to stop, have to push the brakes completely to the floor before the vehicle will stop. the brakes appear to be worse when the roads are wet. dealer can't find a problem with the brakes. **ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS
1
 Pcrv in the rear brakes failed prior to recall notice 00v-075. nlm
2
 Brakes fade.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC
11/01/1996205/01/1996
 Body paint-acid like blemishes; brakes-premature wearing out; seat- driver's seat loose; seat belt- belt does not retract fully and catches in closing door ,resulting in broken button; engine(cold starts)- engine prone to stalling and low idle speed; remote trunk and fuel filler door release - remote release does not always function; water leaks into trunk while trunk is open; vehicle rides harshly - struts checked and no trouble found; auto transmission shifting difficulty shifting from reverse to park; trunk lock inoperable during cold weather; power windows binding.
 When driving 55 mph or above and applying the brakes entire steering column vibrates, cause unknow., dealer replaced the brake rotors and pads, which did not correct the problem. please give any further details. *ak
01/07/1999103/01/1996
 Front brakes including driver side rotor required replacement at 26,500 miles. the outside brake pad on this wheel , visible thru aluminum wheel, had a full 3/16 of pad remaining and the inner pad was completely gone (metal to metal) when replaced. only sign of problem was unusual noise approx. one week before replacement. all other previous cars have been gm or chrysler which have squealer clips on brake pads that alert you to need for repair while pads are still in safe operating condition. dealer told me ford does not put these clips on their pads. i believe these low cost clips are a very important safety feature and should be mandated on all cars sold in the us.
08/01/199804/09/1997
 Abs wiring replaced/rotors worn out before pads/master cyliner replaced, and grinding noise with good pads. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER
1
 Caliper failed.
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR
06/30/1996
 Front brake rotors failed.also replaced battery.
03/15/19965
 Owner claims that the car rotor's wear down quickly. she has to replace them every month. *ak
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER
08/01/199804/09/1997
 Abs wiring replaced/rotors worn out before pads/master cyliner replaced, and grinding noise with good pads. *ak
1
 Master cylinder failed.
SERVICE BRAKES, HYDRAULIC - POWER ASSIST - HYDRAULIC - HOSES, LINES/PIPING, AND FITTINGS
11/13/20001
 Received recall 00v075000. contacted dealership & mechanic claimed repairs done on vehicle when brought in, within one hour. was driving vehicle on november 17, 2000, and power assist brake valves locked up & lost all power to vehicle. vehicle went backwards into a ravine. vehicle towed & was declared totaled by insurance company. *ak

Some parts © 2026 Advameg, Inc.
Based on public records. Inadvertent errors are possible.
This web site is not associated with, endorsed by, or sponsored by and has no official or unofficial affiliation with the vehicle's manufacturer.