Bulletins


BulletinBulletin dateReplacement BulletinItem no.SummaryAdded
EXTERIOR LIGHTING - HEADLIGHTS
T-SB-0036-0804/15/200810024893Some 2004-07 model year highlander or 2006-07 model year highlander hv vehicles may exhibit a condition where the headlight lens cover and/or headlight bulb is discolored. *nj06/05/2008

Consumer Complaints


Fail datemilesoccurencesPurchase date
EXTERIOR LIGHTING
09/01/20111500001
 Late last year we noticed that the dayrunning portion of the headlamp cover had melted on the inside, next to the tip of the bulbs on each side. there is no way to turn the dayrunning feature on or off, it is always on. not only does this wear down the battery, which we've already replaced in one year, but the headlight cover cannot handle the heat generated from constantly being on. we would like this issue resolved and a discount given on a new set, since it isn't our fault, as it couldn't be turned off. headlights are expensive, and at night it is a safety issue, since our visibility is drastically reduced- where we live, there are deer and winding hilly roads. if toyota won't do anything, we will be forced to do this expensive repair ourselves, but will be very, very disappointed. toyota should stand behind their product, this is a design flaw and a huge safety issue. *tr
09/01/2011150000
 Late last year we noticed that the dayrunning portion of the headlamp cover had melted on the inside, next to the tip of the bulbs on each side. there is no way to turn the dayrunning feature on or off, it is always on. not only does this wear down the battery, which we've already replaced in one year, but the headlight cover cannot handle the heat generated from constantly being on. we would like this issue resolved and a discount given on a new set, since it isn't our fault, as it couldn't be turned off. headlights are expensive, and at night it is a safety issue, since our visibility is drastically reduced- where we live, there are deer and winding hilly roads. if toyota won't do anything, we will be forced to do this expensive repair ourselved, but will be very, very disappointed. toyota should stand behind their product, this is a design flaw and a huge safety issue.
12/15/201083000
 The lenses of the daytime running lamps/high beams have developed white, oval-shaped bubbling/melting marks of approximately 0.5 to 0.75 inches in diameter, in the center of the lenses, directly in front of the lamps. i first noticed this in december 2010 just prior to changing the original lamps (therefore the replacement lamps did not cause this problem). i reported this to toyota, case number 1012071480. toyota told me to take this up with the service department of a dealer. at the dealership, i was initially quoted a price of $988 to replace the assemblies. after discussion with the service manager and his follow-up with toyota, the price was lowered to $396 to pay only for labor, parts to be provided at no charge. i opted to not have this done for this price. possible safety issues: 1) damaged/melting lenses could impact the effectiveness of the high beams and/or the daytime running lamps; 2) heat that is hot enough to damage/melt the lenses could be a fire hazard; 3) damaged/melting lenses could be an indication of an electrical problem. i have digital photos taken in december 2010 showing the damaged/melting lenses that i have provided to toyota and would be pleased to provide to nhtsa. i have also retained the original lamps, and the car still has the damaged/melted lenses.
10/03/201073000
 Recently discovered two white melted bumps in the exact center of the headlamp casing where the daytime running lamp beams pass through the plastic. have only had the vehicle since july 2010 and the incident occured during a 19 hour drive, most of which took place during daylight hours. headlights were not turned on until sunset. concerned that factory lights are hot enough to melt the plastic that is factory installed. obvious defect, could cause fire. impaired vision at night also a result as plastic is now permanently damaged. also concerned that issue could worsen and hole could appear, causing rain and elements to come in direct contact with lighting system. another obvious danger. disengaging daytime lights is not an option, no control over overheating other to turn on headlights 100% of time. also concerned with this solution, as defect could potentially be similar in these as well. attempted to have dealer look at problem, however warrantly period has expired. after researching online, found several similar instances on models ranging from 2004-2007. feel strongly that issue should be investigated as passenger saftey is at risk.
11/16/20091
 Lens plate covers over fog lights are melting. this could result in a fire. *tr
12/22/2008400001
 Tl* the contact owns a 2004 toyota highlander. the plastic on the headlights have peeled, subsequently causing the lights to appear very dim. the vehicle was taken to the dealer and the technician concluded that buffing would remedy the failure. the failure mileage was 40000. the current mileage was 51400, updated 10/19/09 *cn updated 10/19/09
12/03/2007106/01/2006
 2004 toyota highlander headlamp material cover failure. consumer states that the mechanic said he had never seen anything like that. consumer stated the mechanic did not offer a corrective action. *kb the consumer stated the lens material had melted and a fog spot was present. when the lamp was removed from the vehicle, a bulge was on the side of the lamp in the up position. *jb
EXTERIOR LIGHTING - FOG LIGHTS
04/09/2005102/18/2004
 I have a 2004 toyota highland and believe there is a design defect or manufacturing flaw with regard to the lens covers to the headlights and fog light covers. both have significant melting from the light bulbs. i am concerned that the vehicle will catch on fire. all products involved are original toyota parts. the lens covers each have a large (bigger than a quarter) circular spot where the melting took place from the inside out and there is a bubble on each. the same has happened with the fog lights and they are now cracked from the heat. i have contacted toyota and they will not fix, replace, repair the lens covers and say that there is no recall. i would imagine that anything melting on a vehicle has the potential to catch fire. this has been progressively getting worse over several years so the incident date is not exact. it is evident that eventually there will be holes in these covers from the heat/melting as the daylights run constantly and cannot be turned off. *tr
EXTERIOR LIGHTING - HEADLIGHTS
04/09/2005102/18/2004
 I have a 2004 toyota highland and believe there is a design defect or manufacturing flaw with regard to the lens covers to the headlights and fog light covers. both have significant melting from the light bulbs. i am concerned that the vehicle will catch on fire. all products involved are original toyota parts. the lens covers each have a large (bigger than a quarter) circular spot where the melting took place from the inside out and there is a bubble on each. the same has happened with the fog lights and they are now cracked from the heat. i have contacted toyota and they will not fix, replace, repair the lens covers and say that there is no recall. i would imagine that anything melting on a vehicle has the potential to catch fire. this has been progressively getting worse over several years so the incident date is not exact. it is evident that eventually there will be holes in these covers from the heat/melting as the daylights run constantly and cannot be turned off. *tr
03/12/20082
 I was leaving my home going to work today and noticed that my wife's toyota 2004 highlander headlight lenses had started to melt where the day time running lamps are. *tr
07/15/2004502501/01/2003
 The new model year 04 toyota highlander suv and sienna vans have poorly designed and or misadjusted daytime running lights, causing blinding glare to on coming drivers, drivers in front of these vehicles and pedestrians walking at night. these excessively glaring lights distract and cause eye pain to other drivers and temporary blindness. this is a serious safety problem that needs to be addressed especially for pedestrians walking against traffic at night.*ak