Winnebago Tour 2007
Model Tour made in 2007 by Winnebago got 4 consumer complains as well as 5 recalls. Consumer complaints with reference to unknown or other. . There were some recalls concerningengine and engine cooling and equipment adaptive.
Model 2007
Recalls
| Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ENGINE AND ENGINE COOLING - ENGINE - DIESEL | ||||||||||||||||
| 07V390000 | WINNEBAGO INDUSTRIES, INC. | from 01/31/2006 to 06/30/2006 | V (Vehicle) | 108 | MFR | WINNEBAGO INDUSTRIES, INC. | 08/29/2007 | 08/29/2007 | ||||||||
| Defect Summary | On certain motor homes built with cummins isl cm850 diesel engines, the connecting rod contains a machining defect in the wrist pin bushing of the rod that could cause a seizure of the piston pin. | |||||||||||||||
| Consequence Summary | If allowed to progress, this can lead to engine failure with the possibility of the rod rupturing the lock cavity, spilling oil and debris onto the roadway increasing the risk of a crash. | |||||||||||||||
| Corrective Summary | Winnebago is working with cummins to recalibrate the engine control module and enhance the engine protection system enabling it to provide early detection of the failure mode and avoid more serious engine damage and resultant safety hazard. cummins will also install a new valve cover with a crankcase pressure sensor free of charge (please see 07e033). owners may contact cummins at 1-800-343-7357 or winnebago at 641-585-3535. | |||||||||||||||
| Notes | Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. | |||||||||||||||
| EQUIPMENT ADAPTIVE | ||||||||||||||||
| 08V149000 | WINNEBAGO INDUSTRIES, INC. | from 01/12/2006 to 01/08/2008 | V (Vehicle) | 31 | 04/09/2008 | MFR | WINNEBAGO INDUSTRIES, INC. | 03/28/2008 | 03/28/2008 | 571 | 404 | |||||
| Defect Summary | Winnebago is recalling 31 my 2006-2008 journey, voyage, my 2006-2007 sightseer, my 2006 adventurer, minnie winnie, my 2007 access, tour, vectra, itasca cambria, and my 2007-2008 itasca horizon motor homes equipped with ricon platform style wheelchair lifts. these motor homes fail to comply with the requirements of federal motor vehicle safety standard no. 404, platform lift installations in motor vehicles. the threshold warning system may not detect the presence of a wheelchair or mobility aid user in a certain spot within the defined threshold area. | |||||||||||||||
| Consequence Summary | The user of the lift could be injured should the lift move unintentionally. | |||||||||||||||
| Corrective Summary | Winnebago is working with ricon to correct the wheelchair lifts free of charge (please see 07e095). the recall began on april 9, 2008. owners may contact ricon at 1-818-267-3000. | |||||||||||||||
| Notes | Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. | |||||||||||||||
| 08V419000 | WINNEBAGO INDUSTRIES, INC. | from 01/12/2006 to 01/08/2008 | V (Vehicle) | 31 | MFR | WINNEBAGO INDUSTRIES, INC. | 08/12/2008 | 08/21/2008 | 571 | 403 | ||||||
| Defect Summary | Winnebago is recalling 31 my 2006-2008 itasca cambria, horizon, winnebago access, adventurer, journey, minnie winnie, signtseer, tour, vectra, and voyage motor homes equipped with ricon platform style wheelchair lifts. these lifts fail to comply with the requirements of federal motor vehicle safety standard no. 403, platform lift systems for motor vehicles. the anti-stow interlock may not detect the presence of a wheelchair or mobility aid user. the pressure sensing switch that detects the presence of weight on the platform was not adjusted to the necessary sensitivity level. the lift could stow even though someone or something is still on the lift. | |||||||||||||||
| Consequence Summary | A lift occupant can be injured should the lift begin to stow unintentionally. | |||||||||||||||
| Corrective Summary | Winnebago is working with ricon to correct the wheelchair lifts (please see 07e097). owners may contact ricon at 1-800-322-2884 or winnebago at 1-641-585-3535. | |||||||||||||||
| Notes | Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
| STEERING - HYDRAULIC POWER ASSIST SYSTEM | ||||||||||||||||
| 08V223000 | WINNEBAGO INDUSTRIES, INC. | from 03/01/2005 to 12/31/2006 | V (Vehicle) | 1699 | MFR | WINNEBAGO INDUSTRIES, INC. | 05/19/2008 | 05/19/2008 | ||||||||
| Defect Summary | Winnebago is recalling 1,699 my 2005-2009 winnebago journey, tour and itasca meridian and ellipse motor homes built on the freightliner xc chassis. the chassis contains steering filters that can plug due to failure of the screen adhesion to the filter housing causing a rise in return line pressure potentially leading to a hose separation from the filter or steering gear fitting resulting in a sudden loss of steering fluid and power assist. | |||||||||||||||
| Consequence Summary | Sudden loss of steering assist without warning involving a motor home could be a problem for certain drivers increasing the risk of a crash. | |||||||||||||||
| Corrective Summary | Freightliner is conducting this recall and will replace the affected filters with a larger filter (please see 07v570). owners may contact freightliner at 1-800-547-0712 or winnebago at 1-641-585-3535. | |||||||||||||||
| Notes | Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. | |||||||||||||||
| STEERING - LINKAGES - TIE ROD ASSEMBLY | ||||||||||||||||
| 08V226000 | WINNEBAGO INDUSTRIES, INC. | from 02/01/2007 to 08/31/2007 | V (Vehicle) | 306 | MFR | WINNEBAGO INDUSTRIES, INC. | 05/19/2008 | 05/19/2008 | ||||||||
| Defect Summary | Winnebago is recalling 306 my 2007-2008 journey, destination, tour and itasca meridian, latitude, and ellipse motor homes built on freightliner chassis. the fasteners that attach the steering arm or tie rod arms to the spindle may be over or under-tightened. | |||||||||||||||
| Consequence Summary | Incorrectly tightened steering arm fasteners may fatigue and fracture which could cause a crash without warning. | |||||||||||||||
| Corrective Summary | Winnebago is working with freightliner to repair these vehicles free of charge (please see 07v306). owners may contact freightliner at 1-800-547-0712 or winnebago at 1-641-585-3535. | |||||||||||||||
| Notes | Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov. | |||||||||||||||
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| UNKNOWN OR OTHER | |||
| 04/01/2011 | 20000 | ||
| My motor home (mh) has a diesel engine. access to the engine is through a rear access door at the back of the mh. while getting serviced about one month ago, i received a call from the service department director that the rear access door fell apart when the service tech opened the door. it subsequently went to a mh repair facility to repair the rear engine bay door. the service manager at the mh repair facility told me that his location has repaired many engine rear access doors on my particular mh brand. he further told me that the problem is that the maker of the mh paints and clear coats the rear engine bay door parts, and then glues them together. due to the fact that the glue is on top of the clear coat, it fails after a couple of years. apparently, as i was told by the mh repair service manager, the glue cannot adhere long term to the clear coat. eventually, as mine did, the entire rear engine bay door falls apart. he told me that his facility has repaired many of these over the years, and my maker of my mh ( and others) have not altered the design. what if i was driving down the road and a motorcycle was behind me? it could very well cause an accident or death. even if the parts, some of which are heavy, hit an automobile, it could cause a serious accident or death. i do not believe for a moment that after all these years that the maker of my mh is not aware of this problem. i feel that the manufacturer should be required to fix all mh of this design. or, at the very least, inform all owners of the problem and the proper fix with a letter sent to them. thank you for your time. | |||