Bulletins
| Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
|---|---|---|---|---|---|
| SERVICE BRAKES, AIR - DISC - ROTOR | |||||
| 9845 | 03/02/1998 | 601264 | Availability of hub-mount brake rotor machining equipment. *yc | 07/15/1998 | |
| SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||||
| 985A6 | 03/18/1998 | 601004 | Some vehicles may cycle when brakes are applied on rough roads or on an incline while making a sharp turn. *yc | 12/14/2000 | |
| 95212 | 10/01/1995 | 46478 | The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable because it may be incompatible with the rubber material used in the disc brake system. if petroleum-based grease is used to lubricate any par | 04/25/1996 | |
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||||
| 985A18 | 03/18/1998 | 601018 | Some vehicles may exhibit brake roughness (brake pedal pulsation, steering wheel shake and / or nibble) under light brake applications from 105 to 0 km/h (65 to 0 mph). *yc | 12/08/2000 | |
| 99194 | 09/20/1999 | 6090082 | Information for servicing and diagnosing brake vibration, brake inspection, and brake friction material replacement. *tt | 03/06/2000 | |
| 985A11 | 03/18/1998 | 601009 | Service tip information regarding elimination of sanding rotors and drums. *yc | 06/17/1998 | |
| 96222 | 10/21/1996 | 50941 | Brakes - elimination of sanding rotors and drums - service tip. *tw | 06/17/1997 | |
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC | |||||
| 985A13 | 03/18/1998 | 601012 | The use of petroleum-based grease as a lubricant in servicing disc brakes is no longer acceptable. *yc | 06/17/1998 | |
| 9562 | 03/01/1995 | 39900 | Roughness concern during brake application. *tw | 11/01/1995 | |
| BC8899950401 | 04/01/1995 | 3030300 | Unknown | 11/01/1995 | |
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR | |||||
| 9814 | 01/19/1998 | 605562 | Subject regarding the availability of hub-mount brake rotor machining equipment. *tt | 07/09/1999 | |
| 985A5 | 03/18/1998 | 601003 | Hub-mount brake rotor machining equipment from rotunda is now approved for warranty and service use. *yc | 06/17/1998 | |
| 94235 | 11/01/1994 | 37731 | Front disc brake noise while braking. *tw | 01/06/1995 | |
| SERVICE BRAKES, HYDRAULIC - SWITCHES - BRAKE LIGHT | |||||
| 02176 | 09/02/2002 | 10008580 | Lamp-brake-invadvertent disabling of brake shift interlock. *mj | 08/05/2004 | |
Consumer Complaints
| Fail date | miles | occurences | Purchase date |
|---|---|---|---|
| SERVICE BRAKES, AIR - DISC - ROTOR | |||
| 06/01/1995 | |||
| Rotors have failed in less than 18000 miles have called ford cusstomer service the lady called the dealer that made the repair who told her it was normal .she then called me back with that information . i told the lady this is not normal she then told me it was and she changed her brakes every six months at that i gave up this may be the reason fordmotor put women on that job | |||
| 11/30/1995 | |||
| Rotors have been replaced 3 times when braking, the vehicle shakes and pulls to the left. especially when braking and making a turn.*ak | |||
| SERVICE BRAKES, HYDRAULIC | |||
| Brakes vibrated and made noise when pressure applied. problem has not been able to be fixed. | |||
| SERVICE BRAKES, HYDRAULIC - ANTILOCK | |||
| 04/12/1999 | 3 | 12/01/1997 | |
| First problems of breaking system started at 40,000 miles bought car at 23,000 miles. the car shimmies and stering wheel vibrates when breaking. have turned rotor twice and replaced brake pads twice. my car is at 50,000 miles now and have replaced with new rotors and new pads for the third time within 10,000 miles because the shimming if getting more violent and will cause me to have an accident i am for sure because this puts stress on all other components of the powertrain. the dealership has told me it is from over torching or riding the brakes. however i have had three previous cars with no problem with brakes and no one has driven these vehicles but me. i do not have industrial wrench so overtorching is not the problem. in conclusion someone is going to die from this malfunction. something is wrong i have already looked at the data on this vehicle from other people and their is considerable amount of problems with the braking system that ford needs to look into and recall i believe.( dot number: tire size: 16 ) | |||
| 12/01/1995 | 3 | 10/01/1995 | |
| The brakes are having to be completly replaced (pads and rotors). if not vehicle is unsafe for operation. currently brakes are lasting about 2,500 miles. torque converter is having to be replaced every 15,000 miles. perhaps from having to do more work in stopping the car. *ak | |||
| 09/01/1998 | 1 | 05/01/1995 | |
| The right front brake squeaks when applying pressure to the brake pedal. the vehicle will pull to the right side of the road. taken to dealer several times for this problem. *ak | |||
| 06/04/1997 | 5 | ||
| When front brakes are in use, brake pedal pulsates & vibrates. steering wheel shakes/vibrates in hand. if brakes are applied quickly, vehicle could go off road. took to dealer & informed was normal. had rotors changed 4 different times. problem also occurred on 28 jun 98. *ak | |||
| 2 | 04/01/1995 | ||
| Brake problems. | |||
| 01/13/1995 | |||
| Abs system over 4 thousand rotors are turned and pads replaced, related to vibration. *ak | |||
| 08/01/1995 | |||
| Abs: applied brakes, vehicle would not stop; pedal went to floor, no resistance, at all; vehicle skidded, hit trunk of another vehicle making turn into driveway | |||
| 09/01/1995 | |||
| Applied abs brake system down to the floor, no response, resulting in an accident. tt | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS | |||
| 10/20/1997 | 0 | ||
| While driving heard a grinding and car would not stop . *ak | |||
| 09/23/1995 | 4 | 05/05/1995 | |
| Brakes vibrate. | |||
| 09/23/1995 | 4 | 05/05/1995 | |
| Brake makes scrubbing sound. | |||
| Consumer has had a continuous problem with the brakes at 10,000 miles, all brakes were replaced .*ak | |||
| When applying the brakes, car makes noise and shakes, please describe . *ak | |||
| 05/27/1996 | |||
| While shifting from drive to park, vehicle was being put into park, accelerated and hit a building, shifted to reverse, vehicle lurched backwards,brakes applied, vehicle would not stop, no warning. *ak | |||
| 07/13/1995 | 3 | ||
| Brakes overheat, causing rotors to warp. *sd | |||
| 10/24/1995 | |||
| The brakes fade while sitting at a light or intersection. they are power brakes. please describe. tt | |||
| 06/20/1995 | 0 | ||
| Vehicle vibrates with brakes are applied after several repair attempts. | |||
| 09/01/1994 | 1 | ||
| When applying the brakes vehicle will vibrate. tt | |||
| 01/01/1995 | 1 | ||
| Braking system failure without abs brakes. tt | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC | |||
| 01/01/1996 | |||
| Front brake pads and rotors malfunctioned due to design flaw. needs to be replaced every 8 -12 months which cause extended stopping distance and may result in a crash. please provide further information. *ak | |||
| 12/01/1995 | 3 | 10/01/1995 | |
| The brakes are having to be completly replaced (pads and rotors). if not vehicle is unsafe for operation. currently brakes are lasting about 2,500 miles. torque converter is having to be replaced every 15,000 miles. perhaps from having to do more work in stopping the car. *ak | |||
| 03/25/1995 | 3 | 03/01/1995 | |
| Car vibrated during stopping almost immediately after purchase. i took the car back and told them the brakes were vibrating, but they said they turned the disks,but it did not help. later i returned it to the dealer again and they ordered a steering computer, still did not fix problem. they then replace the steering cylinder. no help. i finially took the brakes disks off myself and had to pay to have them turned and which has fixed the problem for now. after reviewing the complaints of other drivers of this model, it is obvious that they know there is a problem, but no recall has every come to fix a very bad handling problem with the 1995 mercury cougar. i feel the government should require the ford motor company to recall and fix this problem. | |||
| 09/01/1998 | 1 | 05/01/1995 | |
| The right front brake squeaks when applying pressure to the brake pedal. the vehicle will pull to the right side of the road. taken to dealer several times for this problem. *ak | |||
| 05/11/1998 | 2 | 03/11/1995 | |
| Brakes squeal and grind because the rotors are warped. steering wheel shimmies while driving approx. 55-65mph on highway every 20,000 miles. vehicle needs new rotors and pads due to front disc brakes being poorly designed. *ak | |||
| 06/04/1995 | 1 | ||
| Warped rotors/pads, causing vehicle to vibrate upon brake application. *ak | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - CALIPER | |||
| Experiencing warping of rotors due to hangup or dragging of calipers, no pad wear, dealers' turned rotors' twice. *ak | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - PADS | |||
| 05/28/1996 | 1 | 08/01/1995 | |
| Front brake pads replaced. | |||
| 12/23/1996 | |||
| When applying the brakes they make a loud noise and the brake light stays on, took vehicle to the dealer and he changed the pads but vehicle still makes the noise. also experienced extended stopping distance. *ak | |||
| 11/13/1995 | |||
| Brake system malfunction, needed replacement pads on all four wheels 4 times. tt | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC - ROTOR | |||
| 01/25/2000 | 2 | 01/01/1999 | |
| The rotors on the front brakes were defective from the manufacturer (original parts). they had been refaced several times without avail, before they were replaced. the master cylinder for the brake system has been replaced due to failure. the power steering pump and rack and pinion has been replaced and needs to be replaced again within one years time. *ak | |||
| 06/04/1997 | 5 | ||
| When front brakes are in use, brake pedal pulsates & vibrates. steering wheel shakes/vibrates in hand. if brakes are applied quickly, vehicle could go off road. took to dealer & informed was normal. had rotors changed 4 different times. problem also occurred on 28 jun 98. *ak | |||
| 09/26/1995 | 2 | 07/22/1995 | |
| Front brake noise and malfunction. | |||
| 08/10/1995 | 4 | ||
| While driving at any given speed and coming to a stop the vehicle started shimmering while putting on the brakes. consumer contacted the dealer, and has had the brake rotors repaired 4 times. consumer stated that the vehicle has started the same problem again. *ak | |||
| 05/28/1996 | 1 | 08/01/1995 | |
| Front rotors turned. | |||
| 01/21/1997 | 4 | ||
| When applying brakes, steering vibrates. dealership replaced front rotors but condition has persisted. *ak | |||
| Non-abs brakes; front brake rotors have been changed three times due to unknown vibration w/steering wheel shaking. on two occasions, brake pedal went to the floor, resulting in a rear end collision. please describe details. *ak | |||
| 05/16/1995 | 6 | ||
| Rotors out of round, causing brakes to pulsate. | |||
| 11/11/1994 | |||
| Consumer has to change the rotor to often can not make a sudden stop. tt | |||
| 06/20/1995 | 0 | ||
| Brake rotors replaced three times. *skd | |||
| The front rotor was cut two times . tt | |||
| 04/25/1995 | |||
| Front disc brakes chatter and pulsate, dealer side turn down the rotor. tt | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM | |||
| 03/15/1999 | 2 | 06/01/1996 | |
| Excessive brake dust on front wheels. rear brake drums keep warping. they have been turned twice. brake pads look good but something keeps causing drums to warp resulting in brake noise and car shimmying when coming to a stop. | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - DRUM | |||
| 05/09/1996 | 1 | 08/01/1995 | |
| Brake drums replaced. | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DRUM - SHOES/LININGS | |||
| 05/09/1996 | 1 | 08/01/1995 | |
| Deglazed rear shoes. | |||
| SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - MASTER CYLINDER | |||
| 10/20/1999 | 0 | ||
| Master cylinder went completly out, and consumer crashed into another car. took car to dealer and they corrected the problem. *ak | |||