International 3200 2003
Model 3200 made in 2003 by International got 6 recalls as well as 1 service bulletin. Technical service bulletines regarding power train. There were some recalls concerningengine and engine cooling and parking brake.
Model 2003
Recalls
Campaign | Manufacturer | Manufacturing date | Type | # of units affected | Date Owner notified Mfg | Recall Initiated by | Manufacturers of recalled vehicles/products | Report Recieved Date | Record Creation Date | Regulation Part Number | FMVSS Number | |||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ENGINE AND ENGINE COOLING | ||||||||||||||||
08V353000 | NAVISTAR, INC | from 09/21/2001 to 12/14/2007 | V (Vehicle) | 24975 | 10/03/2008 | ODI | NAVISTAR, INC | 07/30/2008 | 07/30/2008 | |||||||
Defect Summary | Navistar is recalling 24,975 my 2003 through 2008 ic be, ce, hc, and re school and commercial buses and 2002 through 2008 international 3200 and 3300 model buses manufactured between september 21, 2001 through december 14, 2007, equipped with international vt365 engines. these vehicles may exhibit engine hard start, no start, or stall conditions due to possibly damaged terminals in the fuse holder connector of the injector drive module (idm) clean battery power circuits. the terminals may have been damaged during electrical continuity testing in the manufacturing process. | |||||||||||||||
Consequence Summary | These conditions could result in a vehicle crash, possibly resulting in personal injury. | |||||||||||||||
Corrective Summary | Navistar will notify owners and replace the idm fuse holder free of charge. the recall began on october 3, 2008. owners can contact navistar toll-free at 1-800-448-7825. | |||||||||||||||
Notes | Navistar's recall no. 08506.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov. | |||||||||||||||
ENGINE AND ENGINE COOLING - ENGINE | ||||||||||||||||
02V204000 | INTERNATIONAL TRUCK AND ENGINE | from 09/21/2001 to 06/26/2002 | V (Vehicle) | 1054 | 10/21/2002 | MFR | NAVISTAR, INC | 07/26/2002 | 08/01/2002 | |||||||
Defect Summary | On certain school buses and heavy duty trucks built with international vt365 engines and manufactured at international diesel of alabama. the injector driver modules (idm) built for the vt365 engines could have missing vibration damping/retention shells and a missing hot-melt process on the dc/dc boards. | |||||||||||||||
Consequence Summary | The missing shells could allow the larger electronic components to become loose and possible break off inside the module during engine operation. depending on what electrical component comes off, the effect on engine operation could result in rough running, loss of power, no start, or in the most severe case, immediate engine shut down without warning, increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will replace the idm modules. owner notification began october 28, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
Notes | Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
PARKING BRAKE - CONVENTIONAL | ||||||||||||||||
02V260000 | INTERNATIONAL TRUCK AND ENGINE | from 11/16/2000 to 04/19/2002 | V (Vehicle) | 11204 | 12/30/2002 | MFR | NAVISTAR, INC | 09/20/2002 | 09/26/2002 | |||||||
Defect Summary | On certain medium and heavy duty trucks built with driveline parking brake codes 04gar, the parking brake assembly may not hold the vehicle in position when set. factors contributing to this possibility are as follows: (1) cracked or broken cams; (2) loose or broken anchor bolts; (3) initial shoe diameter not set properly during assembly, which can lead to progressive component damage; (4) bent adjuster levers that cannot function; or (5) automatic adjuster cables that are disconnected. | |||||||||||||||
Consequence Summary | If the parking brake does not function properly, the vehicle could roll, without warning, after the parking brake lever has been set, increasing the risk of a crash. | |||||||||||||||
Corrective Summary | Dealers will replace the cam, lever, and bolt. owner notification began december 30, 2002. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
Notes | Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236). | |||||||||||||||
SERVICE BRAKES, AIR - SUPPLY - COMPRESSOR | ||||||||||||||||
03V414000 | INTERNATIONAL TRUCK & ENGINE CORPORATION | from 10/01/2002 to 09/15/2003 | V (Vehicle) | 924 | 01/23/2004 | MFR | NAVISTAR, INC | 10/22/2003 | 10/29/2003 | |||||||
Defect Summary | On certain trucks equipped with v8 engines and air brakes or air operated park brakes, a stand-off bracket was not installed. the bracket supports the copper air compressor discharge tube. normal vehicle and engine vibration can cause the unsupported copper tube to fail at or near the air compressor connection. | |||||||||||||||
Consequence Summary | A failed compressor discharge tube could deplete the air system and may cause the parking brakes to apply. this condition could cause the vehicle to slow down or stop unexpectedly and result in a crash. | |||||||||||||||
Corrective Summary | Dealers will inspect and repair the stand-off bracket as necessary. owner notification is expected to begin during december 2003. owners should contact international truck at 1-800-448-7825. | |||||||||||||||
Notes | International recall no. 03515.customers can also contact the national highway traffic safety administration | |||||||||||||||
SERVICE BRAKES, HYDRAULIC | ||||||||||||||||
03V024000 | INTERNATIONAL TRUCK AND ENGINE | from 07/16/2002 to 01/14/2003 | V (Vehicle) | 146 | 02/24/2003 | MFR | NAVISTAR, INC | 01/28/2003 | 02/05/2003 | 571 | 105 S5.3.1 | |||||
Defect Summary | Certain school buses and heavy duty trucks built with hydraulic brakes and an air powered parking brake (brake code 04gas) fail to comply with the requirements of federal motor vehicle safety standard no. 105, | |||||||||||||||
Consequence Summary | Without the brake monitor module, the brake warning light will not come on during the initial key-on cycle and will not come on to warn the operator if there is a loss of hydraulic pressure in the brake system, a loss of power steering flow, or if the emergency brake booster motor is not functioning. | |||||||||||||||
Corrective Summary | Dealers will install the hydraulic brake monitor module. owner notification is began during february 2003. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825. | |||||||||||||||
Notes | International recall no. 03501. customers can also contact the national highway traffic safety administration | |||||||||||||||
SERVICE BRAKES, HYDRAULIC - FOUNDATION COMPONENTS - DISC | ||||||||||||||||
03V062000 | INTERNATIONAL TRUCK & ENGINE CORPORATION | from 04/01/1997 to 06/03/2002 | V (Vehicle) | 35074 | 10/29/2004 | ODI | NAVISTAR, INC | 02/25/2003 | 03/05/2003 | |||||||
Defect Summary | On certain school and transit buses built with bosch zero offset pin slide (zops) hydraulic disc brakes, the zops hydraulic disc brakes may experience calipers sticking in the applied position, which can result in excessive or abnormal heat generation at one or more of the brakes. | |||||||||||||||
Consequence Summary | The combination of the following factors may collectively result in an unreasonable risk to motor vehicle safety: potential fire at a wheel end, high incident rates of stuck calipers, and evacuation and containment concerns relating to multiple passengers. | |||||||||||||||
Corrective Summary | International will notify its customers and repair the buses free of charge. the recall began october 29, 2004. | |||||||||||||||
Notes | International recall no. 03502/04501.customers can also contact the national highway traffic safety administration |
Bulletins
Bulletin | Bulletin date | Replacement Bulletin | Item no. | Summary | Added |
---|---|---|---|---|---|
POWER TRAIN - AXLE ASSEMBLY - AXLE SHAFT | |||||
IK-1400014 | 10/25/2011 | 10041964 | Navistar truck: the transfer case has an input shaft leak. also, there is a seal leak on the rear axle wheel. axle seals and input shaft seal at transfer case still have an issue of leaking after work on axle half shafts were done. | 11/21/2011 |